Instruments by Science Group
Macromolecular
Soft Condensed 
Imaging and
Biological
Magnetic
Structures and
Crystallography 
Spectroscopy I12 Contact
Science Group Leader
Julia Parker
Email: [email protected]
Tel: +44 (0)1235 778924
I12 JEEP: Joint Engineering, Environment and Processing
Status: Operational
Beamsize: From 50 micrometer x 50 micrometer to 50 mm x 15 mm (EH1) or 100 mm x 30 mm (EH2)
Energy: 53 – 150 keV
Energy: 53 – 150 keV
Publications
These papers are all based at least in part on data gathered on beamline I12. If you have published a paper based on data from I12 which doesn't appear here, please send a reference (ideally including a DOI) to us.
42 items found for 2025 [total: 575]
The integrity of historic fibrous plaster ceilings under dynamic loading Construction And Building Materials, 506 Dec 2025 DOI: 10.1016/j.conbuildmat.2025.144852
Separating the effect of athermal and isothermal ω on superelasticity in Ti-24Nb (at.%) Intermetallics, 189 Dec 2025 DOI: 10.1016/j.intermet.2025.109129
On the role of athermal and isothermal omega on the stress induced martensitic transformation in Ti-18Nb (at.%) Materialia, 44 Dec 2025 DOI: 10.1016/j.mtla.2025.102608
Effect of cyclic loading on the magnetic properties of FeCo-2V alloy Journal Of Magnetism And Magnetic Materials, 61 Dec 2025 DOI: 10.1016/j.jmmm.2025.173752
X-ray simulations with gVXR in education, digital twining, experiment planning, and data analysis Nuclear Instruments And Methods In Physics Research Section B: Beam Interactions With Materials And Atoms, 568 Nov 2025 DOI: 10.1016/j.nimb.2025.165804
Journal Paper DIAD-Dual Imaging and Diffraction Beamline I12-JEEP: Joint Engineering, Environmental and Processing open access
Ultrahigh X-ray imaging and diffraction operando studies of ultrasound processing of Al alloys and graphites Nov 2025
Thesis DIAD-Dual Imaging and Diffraction Beamline E02-JEM ARM 300CF I12-JEEP: Joint Engineering, Environmental and Processing
Deep learning segmentation of fibre, matrix, and void microstructure in carbon fibre and flax fibre polymer composites : phase segmentation in carbon fibre and flax fibre polymer composites using lightweight deep neural networks Nov 2025
Thesis I12-JEEP: Joint Engineering, Environmental and Processing
Pre-activation as a route for tuning the kinetics of mechanochemical transformations Angewandte Chemie International Edition, Nov 2025 DOI: 10.1002/anie.202516632
The effect of the rolling reduction ratio on the superelastic properties of Ti-24Nb-4Zr-8Sn (wt%) Metals, 15 Nov 2025 DOI: 10.3390/met15121323
The total stress approach to martensitic transformations in Ti-Nb-based alloys Communications Materials, 6 Nov 2025 DOI: 10.1038/s43246-025-00986-x
Probing the cause of capacity fade in large-format Li-Ion pouch cells through multimodal characterization Advanced Energy And Sustainability Research, Nov 2025 DOI: 10.1002/aesr.202500243
Room-temperature superplasticity in a biodegradable Zn-0.1Mg alloy Metals, 15 Oct 2025 DOI: 10.3390/met15101161
Retained-austenite transformation precedes grain fragmentation in carbon-partitioned QP1180 steel Scripta Materialia, 271 Oct 2025 DOI: 10.1016/j.scriptamat.2025.117024
The oldest known lepidosaur and origins of lepidosaur feeding adaptations Nature, 65 Sept 2025 DOI: 10.1038/s41586-025-09496-9
Assessing manufacturing defects in ceramic composites with both simulated and experimental synchrotron computed tomography Progress In Nuclear Energy, 190 Sept 2025 DOI: 10.1016/j.pnucene.2025.106002
Journal Paper I12-JEEP: Joint Engineering, Environmental and Processing
Pore-lean directed energy deposition additive manufacturing through laser power modulation Acta Materialia, 372 Sept 2025 DOI: 10.1016/j.actamat.2025.121515
Satellite intensity and forbidden reflections from stacking faults in a deformed superalloy Acta Materialia, 199 Sept 2025 DOI: 10.1016/j.actamat.2025.121542
Synchrotron X-ray diffraction of restricted Earth return samples in containment Sept 2025
Conference Paper I12-JEEP: Joint Engineering, Environmental and Processing
Non-invasive preservation assessment of archaeological animal bones by complementary imaging techniques Heritage, 8 Aug 2025 DOI: 10.3390/heritage8090347
Local strain field evolution at shot-peened 7075 Al-base notches upon tensile loading using in-situ synchrotron X-ray µ-diffraction Journal Of Alloys And Compounds, 21 Aug 2025 DOI: 10.1016/j.jallcom.2025.182861
Journal Paper I12-JEEP: Joint Engineering, Environmental and Processing
Effect of temperature, strain and microstructure on texture evolution of Ti-6Al-4V during hot rolling Metallurgical And Materials Transactions A, 68 Aug 2025 DOI: 10.1007/s11661-025-07929-8
Runaway resorption of microcracks contributes to age-related hip-fracture patients Scientific Reports, 15 Aug 2025 DOI: 10.1038/s41598-025-12494-6
Adaptations for stealth in the wing-like flippers of a large ichthyosaur Nature, 33 Jul 2025 DOI: 10.1038/s41586-025-09271-w
Instrumentation for Mars sample return basic characterisation Jul 2025 DOI: 10.25392/leicester.data.29591534
Thesis I12-JEEP: Joint Engineering, Environmental and Processing
Influence of mechanical loading and temperature on the magnetic properties of FeCo-2V soft magnetic alloy Jul 2025 DOI: 10.17863/CAM.123670
Thesis I12-JEEP: Joint Engineering, Environmental and Processing
Linking eruptive style with pore network geometry in tephritic/basanitic tephra from the 2021 Tajogaite eruption (Canary Islands, Spain) Bulletin Of Volcanology, 87 June 2025 DOI: 10.1007/s00445-025-01833-0
Loading of a porous rock with constant micro-seismic event rate suppresses seismicity and promotes subcritical failure Scientific Reports, 15 June 2025 DOI: 10.1038/s41598-025-03105-5
Feasibility study on using combined tomography and spectroscopy techniques to evaluate the physical and chemical characteristics of organo-mineral fertilisers Frontiers In Sustainable Food Systems, 9 June 2025 DOI: 10.3389/fsufs.2025.1570461
Mechanical properties and deformation mechanisms of metastable β Ti-12Mo alloy fabricated by in-situ alloying-based additive manufacturing Additive Manufacturing, 107 June 2025 DOI: 10.1016/j.addma.2025.104819
Effects of stress and irradiation on hydride precipitation and dissolution in zirconium alloys June 2025
Thesis I12-JEEP: Joint Engineering, Environmental and Processing
Dynamic precipitation in Al-Zn-Mg-Cu alloys: A comparative analysis of uniaxial tension and cross-die forming Journal Of Alloys And Compounds, 32 May 2025 DOI: 10.1016/j.jallcom.2025.180840
Journal Paper I12-JEEP: Joint Engineering, Environmental and Processing I22-Small angle scattering & Diffraction open access
Stepwise reactions in the potassium and ammonia-intercalated iron selenide superconductor phase diagram followed by in situ powder diffraction Journal Of The American Chemical Society, May 2025 DOI: 10.1021/jacs.5c00356
Journal Paper B18-Core EXAFS I11-High Resolution Powder Diffraction I12-JEEP: Joint Engineering, Environmental and Processing open access
Development of low-cost Ti alloys with a balanced strength and ductility with generation of ultra-fine microstructures Journal Of Alloys And Compounds, 845 May 2025 DOI: 10.1016/j.jallcom.2025.180786
Advanced battery cathode microstructure analysis through operando synchrotron X-ray tomography and super-resolution deep learning Solid State Ionics, 422 Apr 2025 DOI: 10.1016/j.ssi.2025.116818
Time-resolved 2D and 3D imaging of hydrogen and brine displacement processes in porous clashach sandstone Journal Of Colloid And Interface Science, 450 Apr 2025 DOI: 10.1016/j.jcis.2025.137704
In-situ modeling of an FeBYNb metallic glass revealing the Invar effect Materials & Design, 24 Apr 2025 DOI: 10.1016/j.matdes.2025.113974
Ultrasound-assisted synthesis of β-cyclodextrin/hydroxyapatite composites as a green and safe additive for enhancing leather properties Journal Of Molecular Structure, 1328 Apr 2025 DOI: 10.1016/j.molstruc.2024.141299
Controls on shear band orientation in deforming porous rocks: insights from improved microcrack segmentation method Journal Of Structural Geology, 69 Mar 2025 DOI: 10.1016/j.jsg.2025.105404
Dynamic imaging of the effect of pore microstructure factors on fine particle migration and deposition during fluid flow through porous media Chemical Engineering Science, 307 Mar 2025 DOI: 10.1016/j.ces.2025.121346
Journal Paper I12-JEEP: Joint Engineering, Environmental and Processing
Li+ concentration and morphological changes at the anode and cathode interphases inside solid-state lithium metal batteries Journal Of Physics: Energy, 7 Feb 2025 DOI: 10.1088/2515-7655/adafda
Vitrification of non-meltable zeolitic-imidazolate frameworks Materials Chemistry Frontiers, 43 Jan 2025 DOI: 10.1039/D4QM00971A
Journal Paper I12-JEEP: Joint Engineering, Environmental and Processing
Characterisation of phase-contrast and phase-retrieval X-ray tomography techniques at the I12-JEEP beamline Nuclear Instruments And Methods In Physics Research Section A: Accelerators, Spectrometers, Detectors And Associated Equipment, 22 Jan 2025 DOI: 10.1016/j.nima.2025.170262
- Barrie Dams, Alexander J. G. Lunt, Xinyi Kong, Jamie Wilson, Shivansh Nauriyal, Martin P. Ansell, Marion Harney, John Stewart, Richard J. Ball, "The integrity of historic fibrous plaster ceilings under dynamic loading", Construction And Building Materials, 506 (2025), DOI: 10.1016/j.conbuildmat.2025.144852
- C. E. P. Talbot, N. I. Church, E. M. Hildyard, L. D. Connor, S. Michalik, N. G. Jones, "Separating the effect of athermal and isothermal ω on superelasticity in Ti-24Nb (at.%)", Intermetallics, 189 (2025), DOI: 10.1016/j.intermet.2025.109129
- N. L. Church, O. G. Reed, N. G. Jones, "On the role of athermal and isothermal omega on the stress induced martensitic transformation in Ti-18Nb (at.%)", Materialia, 44 (2025), DOI: 10.1016/j.mtla.2025.102608
- Sirapob Toyting, Christopher W. Harrison, Stefan Michalik, Alexis Lambourne, Howard J. Stone, "Effect of cyclic loading on the magnetic properties of FeCo-2V alloy", Journal Of Magnetism And Magnetic Materials, 61 (2025), DOI: 10.1016/j.jmmm.2025.173752
- Franck P. Vidal, Shaghayegh Afshari, Sharif Ahmed, Alberto Albiol, Francisco Albiol, Éric Béchet, Alberto Corbí Bellot, Stefan Bosse, Simon Burkhard, Younes Chahid, Cheng-Ying Chou, Robert Culver, Pascal Desbarats, Lewis Dixon, Johan Friemann, Amin Garbout, Marcos García-Lorenzo, Jean-François Giovannelli, Ross Hanna, Clémentine Hatton, Audrey Henry, Graham Kelly, Christophe Leblanc, Alberto Leonardi, Jean Michel Létang, Harry Lipscomb, Tristan Manchester, Bas Meere, Claire Michelet, Simon Middleburgh, Radu P. Mihail, Iwan Mitchell, Liam Perera, Martí Puig, Malek Racy, Ali Rouwane, Hervé Seznec, Aaron Sújar, Jenna Tugwell-Allsup, Pierre-Frédéric Villard, "X-ray simulations with gVXR in education, digital twining, experiment planning, and data analysis", Nuclear Instruments And Methods In Physics Research Section B: Beam Interactions With Materials And Atoms, 568 (2025), DOI: 10.1016/j.nimb.2025.165804
- [Thesis] Kang Xiang, "Ultrahigh X-ray imaging and diffraction operando studies of ultrasound processing of Al alloys and graphites" (2025)
- [Thesis] Md Kabir, "Deep learning segmentation of fibre, matrix, and void microstructure in carbon fibre and flax fibre polymer composites : phase segmentation in carbon fibre and flax fibre polymer composites using lightweight deep neural networks" (2025)
- Christian Heinekamp, Tahlia Palmer, Dominik Al-Sabbagh, Anastasia May, Carsten Prinz, Stefan Michalik, Adam A. L. Michalchuk, Franziska Emmerling, "Pre-activation as a route for tuning the kinetics of mechanochemical transformations", Angewandte Chemie International Edition (2025), DOI: 10.1002/anie.202516632
- Oliver G. Reed, Benjamin T. Desson, Nicole L. Church, Nicholas G. Jones, "The effect of the rolling reduction ratio on the superelastic properties of Ti-24Nb-4Zr-8Sn (wt%)", Metals, 15 (2025), DOI: 10.3390/met15121323
- Nicole L. Church, Christian E. P. Talbot, Simon M. Fairclough, Nicholas G. Jones, "The total stress approach to martensitic transformations in Ti-Nb-based alloys", Communications Materials, 6 (2025), DOI: 10.1038/s43246-025-00986-x
- Emily C. Giles, Abbey Jarvis, Pierrot S. Attidekou, Kieran O'Regan, Rosie Madge, Alexander T. Sargent, Beatrice Browning, Anton Zorin, Roberto Sommerville, Alex J. Green, Stefan Michalik, Philip A. Chater, Daniel Reed, Emma Kendrick, Laura L. Driscoll, Peter Slater, Phoebe K. Allan, Paul Anderson, Luke Sweeney, "Probing the cause of capacity fade in large-format Li-Ion pouch cells through multimodal characterization", Advanced Energy And Sustainability Research (2025), DOI: 10.1002/aesr.202500243
- Karel Saksl, Róbert Kočiško , Patrik Petroušek, Miloš Matvija, Martin Fujda, Dávid Csík, Zuzana Molcanová, Beáta Ballóková, Iryna Cuperová, Katarína Gáborová, Maksym Lisnichuk, Miloslav Lupták, Adam Lupták, "Room-temperature superplasticity in a biodegradable Zn-0.1Mg alloy", Metals, 15 (2025), DOI: 10.3390/met15101161
- Liliana Romero Resendiz, Muhammad Naeem, Vicente Amigo, Christina Reinhard, Stefan Michalik, Terence G. Langdon, Yi Huang, "Retained-austenite transformation precedes grain fragmentation in carbon-partitioned QP1180 steel", Scripta Materialia, 271 (2025), DOI: 10.1016/j.scriptamat.2025.117024
- Daniel Marke, David I. Whiteside, Thitiwoot Sethapanichsakul, Robert A. Coram, Vincent Fernandez, Alexander Liptak, Elis Newham, Michael J. Benton, "The oldest known lepidosaur and origins of lepidosaur feeding adaptations", Nature, 65 (2025), DOI: 10.1038/s41586-025-09496-9
- Iwan T. Mitchell, Fabio Martini, Gareth F. Stephens, Simon C. Middleburgh, Franck P. Vidal, "Assessing manufacturing defects in ceramic composites with both simulated and experimental synchrotron computed tomography", Progress In Nuclear Energy, 190 (2025), DOI: 10.1016/j.pnucene.2025.106002
- Kai Zhang, Shishira Bhagavath, Sebastian Marussi, Alexander Rack, Robert Atwood, Martyn A. Jones, Chu Lun Alex Leung, Chinnapat Panwisawas, Junji Shinjo, Peter D. Lee, "Pore-lean directed energy deposition additive manufacturing through laser power modulation", Acta Materialia, 372 (2025), DOI: 10.1016/j.actamat.2025.121515
- J. R. Miller, H. C. Cole, J. M. Hogg, J. Pitchforth, L. D. Connor, P. Vacek, S. Neumeier, N. L. Church, P. A. Midgley, D. M. Collins, C. M. F. Rae, H. J. Stone, "Satellite intensity and forbidden reflections from stacking faults in a deformed superalloy", Acta Materialia, 199 (2025), DOI: 10.1016/j.actamat.2025.121542
- [Conference Paper] Lukas Adam, John C. Bridges, Adrian Martindale, John M. C. Holt, Candice C. Bedford, Jose M. Busquets, Adam E. L. White, Thomas Zillhardt, Thomas J. Mcnaughton, "Synchrotron X-ray diffraction of restricted Earth return samples in containment" (2025)
- Chloe Pearce, Fabien Leonard, Oxana V. Magdysyuk, David Thickett, Genoveva Burca, Marianne Odlyha, "Non-invasive preservation assessment of archaeological animal bones by complementary imaging techniques", Heritage, 8 (2025), DOI: 10.3390/heritage8090347
- A. Madariaga, E. Vazquez, D. Foster, Enrique Jimenez-Melero, "Local strain field evolution at shot-peened 7075 Al-base notches upon tensile loading using in-situ synchrotron X-ray µ-diffraction", Journal Of Alloys And Compounds, 21 (2025), DOI: 10.1016/j.jallcom.2025.182861
- Xiaohan Zeng, Christopher S. Daniel, William Asheshov, Stefan Michalik, Philip Prangnell, Joao Quinta Da Fonseca, "Effect of temperature, strain and microstructure on texture evolution of Ti-6Al-4V during hot rolling", Metallurgical And Materials Transactions A, 68 (2025), DOI: 10.1007/s11661-025-07929-8
- Marena Gray, Oliver Boughton, Crispin Wiles, Christina Reinhard, Nghia T. Vo, Robert Atwood, Richard Stavri, Justin P. Cobb, Ulrich Hansen, Richard L. Abel, "Runaway resorption of microcracks contributes to age-related hip-fracture patients", Scientific Reports, 15 (2025), DOI: 10.1038/s41598-025-12494-6
- Johan Lindgren, Dean R. Lomax, Robert-Zoltán Szász, Miguel Marx, Johan Revstedt, Georg Göltz, Sven Sachs, Randolph G. De La Garza, Miriam Heingård, Martin Jarenmark, Kristina Ydström, Peter Sjövall, Frank Osbæck, Stephen A. Hall, Michiel Op De Beeck, Mats E. Eriksson, Carl Alwmark, Federica Marone, Alexander Liptak, Robert Atwood, Genoveva Burca, Per Uvdal, Per Persson, Dan-Eric Nilsson, "Adaptations for stealth in the wing-like flippers of a large ichthyosaur", Nature, 33 (2025), DOI: 10.1038/s41586-025-09271-w
- [Thesis] Lukas F. Adam, "Instrumentation for Mars sample return basic characterisation" (2025), DOI: 10.25392/leicester.data.29591534
- [Thesis] Sirapob Toyting, "Influence of mechanical loading and temperature on the magnetic properties of FeCo-2V soft magnetic alloy" (2025), DOI: 10.17863/CAM.123670
- Barbara Bonechi, Emily C. Bamber, Margherita Polacci, F. Arzilli, Giuseppe La Spina, Elisa Biagioli, Jorge E. Romero, Jean-Louis Hazemann, Richard Brooker, Robert Atwood, Mike Burton, "Linking eruptive style with pore network geometry in tephritic/basanitic tephra from the 2021 Tajogaite eruption (Canary Islands, Spain)", Bulletin Of Volcanology, 87 (2025), DOI: 10.1007/s00445-025-01833-0
- Maria-Daphne Mangriotis, Alexis Cartwright-Taylor, Ian G. Main, Andrew Curtis, Andrew F. Bell, Ian B. Butler, Florian Fusseis, "Loading of a porous rock with constant micro-seismic event rate suppresses seismicity and promotes subcritical failure", Scientific Reports, 15 (2025), DOI: 10.1038/s41598-025-03105-5
- Ruben Sakrabani, Sara Mosca, Alexander Liptak, Genoveva Burca, "Feasibility study on using combined tomography and spectroscopy techniques to evaluate the physical and chemical characteristics of organo-mineral fertilisers", Frontiers In Sustainable Food Systems, 9 (2025), DOI: 10.3389/fsufs.2025.1570461
- Ranxi Duan, Fuzeng Ren, Dingshan Liang, Dominik Daisenberger, Oxana Magdysyuk, Junhua Luan, Zengbao Jiao, Moataz M. Attallah, Biao Cai, "Mechanical properties and deformation mechanisms of metastable β Ti-12Mo alloy fabricated by in-situ alloying-based additive manufacturing", Additive Manufacturing, 107 (2025), DOI: 10.1016/j.addma.2025.104819
- [Thesis] Jonathan Balog, "Effects of stress and irradiation on hydride precipitation and dissolution in zirconium alloys" (2025)
- Ziyu Ma, Elliot Cooksey-Nash, Madeleine Bignon, Adam Taylor, Joseph Robson, Matthew R. Barnett, "Dynamic precipitation in Al-Zn-Mg-Cu alloys: A comparative analysis of uniaxial tension and cross-die forming", Journal Of Alloys And Compounds, 32 (2025), DOI: 10.1016/j.jallcom.2025.180840
- Simon J. Cassidy, Daniel N. Woodruff, Stefan J. Sedlmaier, Jack N. Blandy, Christina Reinhard, Oxana V. Magdysyuk, Andrew L. Goodwin, Silvia Ramos, Simon J. Clarke, "Stepwise reactions in the potassium and ammonia-intercalated iron selenide superconductor phase diagram followed by in situ powder diffraction", Journal Of The American Chemical Society (2025), DOI: 10.1021/jacs.5c00356
- Zhiyi Zou, Matthew K. Dunstan, Brandon Mcwilliams, Stuart Robertson, Richard Hague, Marco Simonelli, "Development of low-cost Ti alloys with a balanced strength and ductility with generation of ultra-fine microstructures", Journal Of Alloys And Compounds, 845 (2025), DOI: 10.1016/j.jallcom.2025.180786
- Mohammad Javad Shojaei, Abeiram Sivarajah, Tayeba Safdar, Oxana V. Magdysyuk, Chu Lun Alex Leung, Chun Huang, "Advanced battery cathode microstructure analysis through operando synchrotron X-ray tomography and super-resolution deep learning", Solid State Ionics, 422 (2025), DOI: 10.1016/j.ssi.2025.116818
- Eike M. Thaysen, Ian B. Butler, Aliakbar Hassanpouryouzband, Catherine Spurin, Damien Freitas, Roberto Rizzo, Fernando Alvarez Borges, Robert Atwood, Katriona Edlmann, "Time-resolved 2D and 3D imaging of hydrogen and brine displacement processes in porous clashach sandstone", Journal Of Colloid And Interface Science, 450 (2025), DOI: 10.1016/j.jcis.2025.137704
- Alexander Firlus, Mihai Stoica, Pál Jóvári, Olivier Mathon, Robin E. Schäublin, Jörg F. Löffler, "In-situ modeling of an FeBYNb metallic glass revealing the Invar effect", Materials & Design, 24 (2025), DOI: 10.1016/j.matdes.2025.113974
- Ilaria Quaratesi, Ioan Călinescu, Petre Chipurici, Elisa-Gabriela Dumbravă, Andrei Cucos, Mohamed Yassine Zaki, Pellegrino La Manna, Adrian Bercea, Miruna Silvia Stan, Stefan Michalik, Chloe Pearce, Marianne Odlyha, Genoveva Burca, Elena Badea, "Ultrasound-assisted synthesis of β-cyclodextrin/hydroxyapatite composites as a green and safe additive for enhancing leather properties", Journal Of Molecular Structure, 1328 (2025), DOI: 10.1016/j.molstruc.2024.141299
- Claudia Elijas-Parra, Alexis Cartwright-Taylor, Ian G. Main, Rebeca E. Ursu, Ian B. Butler, Florian Fusseis, "Controls on shear band orientation in deforming porous rocks: insights from improved microcrack segmentation method", Journal Of Structural Geology, 69 (2025), DOI: 10.1016/j.jsg.2025.105404
- Ke Wang, Chenzi Shi, Shuangyi Gong, Kuhan Chellappah, Philip J. Withers, Kevin G. Taylor, Robert Atwood, Lin Ma, "Dynamic imaging of the effect of pore microstructure factors on fine particle migration and deposition during fluid flow through porous media", Chemical Engineering Science, 307 (2025), DOI: 10.1016/j.ces.2025.121346
- Chun Huang, Matthew D. Wilson, Ben Cline, Abeiram Sivarajah, Wiebe Stolp, Matthieu N. Boone, Thomas Connolley, Chu Lun Alex Leung, "Li+ concentration and morphological changes at the anode and cathode interphases inside solid-state lithium metal batteries", Journal Of Physics: Energy, 7 (2025), DOI: 10.1088/2515-7655/adafda
- Mohamed. A. Ali, Zhihua Qiao, Wessel M. W. Winters, Biao Cai, Moushira. A. Mohamed, Yanfei Zhang, Xiaofeng Liu, Yuanzheng Yue, Jianrong Qiu, "Vitrification of non-meltable zeolitic-imidazolate frameworks", Materials Chemistry Frontiers, 43 (2025), DOI: 10.1039/D4QM00971A
- Alexander Liptak, Robert Atwood, Thomas Zillhardt, Stefan Michalik, Genoveva Burca, "Characterisation of phase-contrast and phase-retrieval X-ray tomography techniques at the I12-JEEP beamline", Nuclear Instruments And Methods In Physics Research Section A: Accelerators, Spectrometers, Detectors And Associated Equipment, 22 (2025), DOI: 10.1016/j.nima.2025.170262
Diamond Light Source is the UK's national synchrotron science facility, located at the Harwell Science and Innovation Campus in Oxfordshire.
Diamond Light Source Ltd
Diamond House
Harwell Science & Innovation Campus
Didcot
Oxfordshire
OX11 0DE
Copyright © Diamond Light Source. Diamond Light Source® and the Diamond logo are registered trademarks of Diamond Light Source Ltd
Registered in England and Wales at Diamond House, Harwell Science and Innovation Campus, Didcot, Oxfordshire, OX11 0DE, United Kingdom. Company number: 4375679. VAT number: 287 461 957. Economic Operators Registration and Identification (EORI) number: GB287461957003.