Instruments by Science Group
Macromolecular
Soft Condensed 
Imaging and
Biological
Magnetic
Structures and
Crystallography 
Spectroscopy I12 Contact
Science Group Leader
Julia Parker
Email: [email protected]
Tel: +44 (0)1235 778924
I12 JEEP: Joint Engineering, Environment and Processing
Status: Operational
Beamsize: From 50 micrometer x 50 micrometer to 50 mm x 15 mm (EH1) or 100 mm x 30 mm (EH2)
Energy: 53 – 150 keV
Energy: 53 – 150 keV
Publications
These papers are all based at least in part on data gathered on beamline I12. If you have published a paper based on data from I12 which doesn't appear here, please send a reference (ideally including a DOI) to us.
32 items found for 2014 [total: 575]
Nuclear waste viewed in a new light; a synchrotron study of uranium encapsulated in grout Journal Of Hazardous Materials, 285 Dec 2014 DOI: 10.1016/j.jhazmat.2014.11.035
Journal Paper I12-JEEP: Joint Engineering, Environmental and Processing
X-ray imaging of subsurface dynamics in high-Z materials at the Diamond Light Source Review Of Scientific Instruments, 85 (12) Dec 2014 DOI: 10.1063/1.4904275
Journal Paper I12-JEEP: Joint Engineering, Environmental and Processing
In situ quantitative three-dimensional characterisation of sub-indentation cracking in polycrystalline alumina Journal Of The European Ceramic Society, 34 (12) Oct 2014 DOI: 10.1016/j.jeurceramsoc.2014.04.002
Journal Paper I12-JEEP: Joint Engineering, Environmental and Processing
Yield behavior beneath hardness indentations in ductile metals, measured by three-dimensional computed X-ray tomography and digital volume correlation Acta Materialia, 82 Oct 2014 DOI: 10.1016/j.actamat.2014.08.046
Journal Paper I12-JEEP: Joint Engineering, Environmental and Processing I13-2-Diamond Manchester Imaging
X-ray Synchrotron Microtomography of a silicified Jurassic Cheirolepidiaceae (Conifer) cone: histology and morphology of Pararaucaria collinsonae sp. nov. Peerj, 2 (624) Oct 2014 DOI: 10.7717/peerj.624
Pore behaviour during semi-solid alloy compression: Insights into defect creation under pressure Scripta Materialia, 89 Oct 2014 DOI: 10.1016/j.scriptamat.2014.06.033
Journal Paper I12-JEEP: Joint Engineering, Environmental and Processing
Hotspot revealed in casting defect processes Oct 2014
Science Highlight I12-JEEP: Joint Engineering, Environmental and Processing
A novel high-temperature furnace for combined in situ synchrotron X-ray diffraction and infrared thermal imaging to investigate the effects of thermal gradients upon the structure of ceramic materials Journal Of Synchrotron Radiation, 21 Sept 2014 DOI: 10.1107/S1600577514014209
'Hybrid' non-destructive imaging techniques for engineering materials applications Sept 2014
Thesis B16-Test Beamline I12-JEEP: Joint Engineering, Environmental and Processing I22-Small angle scattering & Diffraction
In-situ investigation of microcrack formation and strains in Ag-Cu-based multi metal matrix composites analysed by synchrotron radiation Materials Science And Engineering: A, 612 Aug 2014 DOI: 10.1016/j.msea.2014.06.018
Journal Paper I12-JEEP: Joint Engineering, Environmental and Processing
3D studies of damage by combined X-ray tomography and digital volume correlation Procedia Materials Science, 3 Aug 2014 DOI: 10.1016/j.mspro.2014.06.251
Reliable method for calculating the center of rotation in parallel-beam tomography Optics Express, 22 Jul 2014 DOI: 10.1364/OE.22.019078
Revealing the micromechanisms behind semi-solid metal deformation with time-resolved X-ray tomography Nature Communications, 5 Jul 2014 DOI: 10.1038/ncomms5464
Mechanistic studies of atmospheric pitting corrosion of stainless steel for ILW containers Corrosion Engineering, Science And Technology, 49 (6 ) June 2014 DOI: 10.1179/1743278214Y.0000000183
Journal Paper I12-JEEP: Joint Engineering, Environmental and Processing
In situ synchrotron tomographic quantification of granular and intragranular deformation during semi-solid compression of an equiaxed dendritic Al–Cu alloy Acta Materialia, 76 June 2014 DOI: 10.1016/j.actamat.2014.05.035
Studies of cosmic dust analogues using synchrotron X-ray powder diffraction June 2014
Thesis I11-High Resolution Powder Diffraction I12-JEEP: Joint Engineering, Environmental and Processing
Early identification of the Li15Si4 phase using in-situ synchrotron XRD June 2014 DOI: 10.1149/MA2014-04/4/730
Poster I12-JEEP: Joint Engineering, Environmental and Processing
In situ studies of solvothermal synthesis of energy materials Chemsuschem, 7 (6) June 2014 DOI: 10.1002/cssc.201301042
Journal Paper I12-JEEP: Joint Engineering, Environmental and Processing
On the relevance of kinking to reversible hysteresis in MAX phases Acta Materialia, 69 May 2014 DOI: 10.1016/j.actamat.2014.01.045
Structural characterisation of a layered double hydroxide nanosheet Nanoscale, 6 (14) May 2014 DOI: 10.1039/c4nr01265h
The onset of plasticity of a Zr-based bulk metallic glass International Journal Of Plasticity, 60 May 2014 DOI: 10.1016/j.ijplas.2014.05.003
Journal Paper I12-JEEP: Joint Engineering, Environmental and Processing
Alloying and the micromechanics of Co-Al-W-X quaternary alloys Materials Science And Engineering: A, Volume 613, 8 September 2014, May 2014 DOI: 10.1016/j.msea.2014.05.044
Towards a notch-sensitivity strength test for irradiated nuclear graphite structural integrity May 2014
Conference Paper I12-JEEP: Joint Engineering, Environmental and Processing
Raising the heat on superconductors May 2014
Science Highlight I12-JEEP: Joint Engineering, Environmental and Processing
A method for accurate texture determination of thin oxide films by glancing-angle laboratory X-ray diffraction Journal Of Applied Crystallography, 47 Apr 2014 DOI: 10.1107/S1600576714000569
Journal Paper I12-JEEP: Joint Engineering, Environmental and Processing
Influence of Fe-rich intermetallics on solidification defects in Al–Si–Cu alloys Acta Materialia, 68 Apr 2014 DOI: 10.1016/j.actamat.2014.01.007
Studying SiC/SiC composites by X-ray tomography Key Engineering Materials, 602-603 Mar 2014 DOI: 10.4028/www.scientific.net/KEM.602-603.416
Journal Paper I12-JEEP: Joint Engineering, Environmental and Processing
Tailoring of unipolar strain in lead-free piezoelectrics using the ceramic/ceramic composite approach Journal Of Applied Physics, 115 (12) Mar 2014 DOI: 10.1063/1.4869786
Journal Paper I12-JEEP: Joint Engineering, Environmental and Processing
Dark-field hyperspectral X-ray imaging Proceedings Of The Royal Society A: Mathematical, Physical And Engineering Sciences, 470 (2165) Feb 2014 DOI: 10.1098/rspa.2013.0629
Ammonia-rich high-temperature superconducting intercalates of iron selenide revealed through time-resolved in situ X-ray and neutron diffraction Journal Of The American Chemical Society, 136 (2) Jan 2014 DOI: 10.1021/ja411624q
Journal Paper I12-JEEP: Joint Engineering, Environmental and Processing
Residual stresses and microstructure in Powder Bed Direct Laser Deposition (PB DLD) samples International Journal Of Material Forming, Jan 2014 DOI: 10.1007/s12289-014-1163-1
Journal Paper I12-JEEP: Joint Engineering, Environmental and Processing
Understanding the deformation mechanism of individual phases of a ZrTi-based bulk metallic glass matrix composite using in situ diffraction and imaging methods Applied Physics Letters, 104 (3) Jan 2014 DOI: 10.1063/1.4863095
Journal Paper I12-JEEP: Joint Engineering, Environmental and Processing
- C. A. Stitt, M. Hart, N. J. Harker, K. R. Hallam, J. Macfarlane, A. Banos, C. Paraskevoulakos, E. Butcher, C. Padovani, T. B. Scott, "Nuclear waste viewed in a new light; a synchrotron study of uranium encapsulated in grout", Journal Of Hazardous Materials, 285, 221 - 227 (2014), DOI: 10.1016/j.jhazmat.2014.11.035
- Daniel Eakins, David Chapman, "X-ray imaging of subsurface dynamics in high-Z materials at the Diamond Light Source", Review Of Scientific Instruments, 85 (12), 123708 (2014), DOI: 10.1063/1.4904275
- Yelena Vertyagina, Mahmoud Mostafavi, Christina Reinhard, Robert Atwood, James Marrow, "In situ quantitative three-dimensional characterisation of sub-indentation cracking in polycrystalline alumina", Journal Of The European Ceramic Society, 34 (12), 3127 - 3132 (2014), DOI: 10.1016/j.jeurceramsoc.2014.04.002
- M. Mostafavi, D. M. Collins, B. Cai, R. Bradley, R. C. Atwood, C. Reinhard, X. Jiang, M. Galano, P. D. Lee, T. J. Marrow, "Yield behavior beneath hardness indentations in ductile metals, measured by three-dimensional computed X-ray tomography and digital volume correlation", Acta Materialia, 82, 468 - 482 (2014), DOI: 10.1016/j.actamat.2014.08.046
- David C. Steart, Alan R. T. Spencer, Russell J. Garwood, Jason Hilton, Martin C. Munt, John Needham, Paul Kenrick, "X-ray Synchrotron Microtomography of a silicified Jurassic Cheirolepidiaceae (Conifer) cone: histology and morphology of Pararaucaria collinsonae sp. nov.", Peerj, 2 (624), 2 (624) (2014), DOI: 10.7717/peerj.624
- K. M. Kareh, P. D. Lee, R. C. Atwood, T. Connolley, C. M. Gourlay, "Pore behaviour during semi-solid alloy compression: Insights into defect creation under pressure", Scripta Materialia, 89, 73 - 76 (2014), DOI: 10.1016/j.scriptamat.2014.06.033
- [Science Highlight] Diamond Light Source, "Hotspot revealed in casting defect processes" (2014)
- James Robinson, Leon Brown, Rhodri Jervis, Oluwadamilola Taiwo, Jason Millichamp, Thomas J. Mason, Tobias P. Neville, David S. Eastwood, Christina Reinhard, Peter Lee, Daniel J. L. Brett, Paul Shearing, "A novel high-temperature furnace for combined in situ synchrotron X-ray diffraction and infrared thermal imaging to investigate the effects of thermal gradients upon the structure of ceramic materials", Journal Of Synchrotron Radiation, 21, 1134 - 1139 (2014), DOI: 10.1107/S1600577514014209
- [Thesis] Nikolaos Baimpas, "'Hybrid' non-destructive imaging techniques for engineering materials applications" (2014)
- Joachim Gussone, Christina Reinhard, Galina Kasperovich, Human Gherekhloo, Tarik Merzouk, Joachim Hausmann, "In-situ investigation of microcrack formation and strains in Ag-Cu-based multi metal matrix composites analysed by synchrotron radiation", Materials Science And Engineering: A, 612, 102-114 (2014), DOI: 10.1016/j.msea.2014.06.018
- James Marrow, Christina Reinhard, Yelena Vertyagina, Luis Saucedo Mora, David Collins, Mahmoud Mostafavi, "3D studies of damage by combined X-ray tomography and digital volume correlation", Procedia Materials Science, 3, 1554 - 1559 (2014), DOI: 10.1016/j.mspro.2014.06.251
- Nghia T. Vo, Michael Drakopoulos, Robert Atwood, Christina Reinhard, "Reliable method for calculating the center of rotation in parallel-beam tomography", Optics Express, 22 (2014), DOI: 10.1364/OE.22.019078
- K. M. Kareh, P. D. Lee, R. C. Atwood, T. Connolley, C. M. Gourlay, "Revealing the micromechanisms behind semi-solid metal deformation with time-resolved X-ray tomography", Nature Communications, 5 (2014), DOI: 10.1038/ncomms5464
- A. J. Davenport, L. Guo, N. Mi, H. Mohammed-Ali, M. Ghahari, Steven Street, N. J. Laycock, T. Rayment, C. Reinhard, C. Padovani, D. Krouse, "Mechanistic studies of atmospheric pitting corrosion of stainless steel for ILW containers", Corrosion Engineering, Science And Technology, 49 (6 ), 514-250 (2014), DOI: 10.1179/1743278214Y.0000000183
- B. Cai, S. Karagadde, L. Yuan, T. J. Marrow, T. Connolley, P. D. Lee, "In situ synchrotron tomographic quantification of granular and intragranular deformation during semi-solid compression of an equiaxed dendritic Al–Cu alloy", Acta Materialia, 76, 371 - 380 (2014), DOI: 10.1016/j.actamat.2014.05.035
- [Thesis] Sarah Day, "Studies of cosmic dust analogues using synchrotron X-ray powder diffraction" (2014)
- [Poster] Shane D. Beattie, Julia S. Weaving, Vijay Thapar, Leigh D. Connor, Maria Aniol , Aisaku Nagai , Stuart Evans, Mary Mckiernan, "Early identification of the Li15Si4 phase using in-situ synchrotron XRD" (2014), DOI: 10.1149/MA2014-04/4/730
- Kirsten M. Ø. Jensen, Christoffer Tyrsted, Martin Bremholm, Bo B. Iversen, "In situ studies of solvothermal synthesis of energy materials", Chemsuschem, 7 (6), 1594 - 1611 (2014), DOI: 10.1002/cssc.201301042
- N. G. Jones, C. Humphrey, L. D. Connor, O. Wilhelmsson, L. Hultman, F. Giuliani, W. J. Clegg, H. J. Stone, "On the relevance of kinking to reversible hysteresis in MAX phases", Acta Materialia, 69, 149 - 161 (2014), DOI: 10.1016/j.actamat.2014.01.045
- Nicholas P. Funnell, Qiang Wang, Leigh Connor, Matthew G. Tucker, Dermot O'Hare, Andrew L. Goodwin, "Structural characterisation of a layered double hydroxide nanosheet", Nanoscale, 6 (14) (2014), DOI: 10.1039/c4nr01265h
- Yongjiang Huang, Jia Chuan Khong, Thomas Connolley, Jiawei Mi, "The onset of plasticity of a Zr-based bulk metallic glass", International Journal Of Plasticity, 60, 87-100 (2014), DOI: 10.1016/j.ijplas.2014.05.003
- Hui-Yu Yan, James Coakley, Vassili A. Vorontsov, Nicholas G. Jones, David Dye, Howard J. Stone, "Alloying and the micromechanics of Co-Al-W-X quaternary alloys", Materials Science And Engineering: A, Volume 613, 8 September 2014,, Pages 201208 (2014), DOI: 10.1016/j.msea.2014.05.044
- [Conference Paper] Thomas Marrow, Matthew Jordan, Yelena Vertyagina, "Towards a notch-sensitivity strength test for irradiated nuclear graphite structural integrity" (2014)
- [Science Highlight] Diamond Light Source, "Raising the heat on superconductors" (2014)
- Alistair Garner, Michael Preuss, Philipp Frankel, "A method for accurate texture determination of thin oxide films by glancing-angle laboratory X-ray diffraction", Journal Of Applied Crystallography, 47, 575 - 583 (2014), DOI: 10.1107/S1600576714000569
- C. Puncreobutr, K. M. Kareh, T. Connolley, J. I. Fife, A. B. Phillion, P. D. Lee, "Influence of Fe-rich intermetallics on solidification defects in Al–Si–Cu alloys", Acta Materialia, 68, 42 - 51 (2014), DOI: 10.1016/j.actamat.2014.01.007
- Xin Gui Zhou, Shuang Zhao, Paul Mummery, James Marrow, "Studying SiC/SiC composites by X-ray tomography", Key Engineering Materials, 602-603, 416 - 421 (2014), DOI: 10.4028/www.scientific.net/KEM.602-603.416
- Neamul Khansur, Claudia Groh, Wook Jo, Christina Reinhard, Justin Kimpton, Kyle Webber, John Daniels, "Tailoring of unipolar strain in lead-free piezoelectrics using the ceramic/ceramic composite approach", Journal Of Applied Physics, 115 (12) (2014), DOI: 10.1063/1.4869786
- Christopher K. Egan, Simon D. M. Jacques, Thomas Connolley, Matthew D. Wilson, Matthew C. Veale, Paul Seller, Robert J. Cernik, "Dark-field hyperspectral X-ray imaging", Proceedings Of The Royal Society A: Mathematical, Physical And Engineering Sciences, 470 (2165), 20130629 - 20130629 (2014), DOI: 10.1098/rspa.2013.0629
- Stefan Sedlmaier, Simon Cassidy, Richard G. Morris, Michael Drakopoulos, Christina Reinhard, Saul Moorhouse, Dermot O'Hare, Pascal Manuel, Dmitry Khalyavin, Simon J. Clarke, "Ammonia-rich high-temperature superconducting intercalates of iron selenide revealed through time-resolved in situ X-ray and neutron diffraction", Journal Of The American Chemical Society, 136 (2), 630 - 633 (2014), DOI: 10.1021/ja411624q
- X. Song, M. Xie, F. Hofmann, T. Illston, T. Connolley, C. Reinhard, R. Atwood, L. Connor, M. Drakopoulos, L. Frampton, A. M. Korsunsky, "Residual stresses and microstructure in Powder Bed Direct Laser Deposition (PB DLD) samples", International Journal Of Material Forming (2014), DOI: 10.1007/s12289-014-1163-1
- Yongjiang Huang, Jia Chuan Khong, Thomas Connolley, Jiawei Mi, "Understanding the deformation mechanism of individual phases of a ZrTi-based bulk metallic glass matrix composite using in situ diffraction and imaging methods", Applied Physics Letters, 104 (3), 17C109 (2014), DOI: 10.1063/1.4863095
Diamond Light Source is the UK's national synchrotron science facility, located at the Harwell Science and Innovation Campus in Oxfordshire.
Diamond Light Source Ltd
Diamond House
Harwell Science & Innovation Campus
Didcot
Oxfordshire
OX11 0DE
Copyright © Diamond Light Source. Diamond Light Source® and the Diamond logo are registered trademarks of Diamond Light Source Ltd
Registered in England and Wales at Diamond House, Harwell Science and Innovation Campus, Didcot, Oxfordshire, OX11 0DE, United Kingdom. Company number: 4375679. VAT number: 287 461 957. Economic Operators Registration and Identification (EORI) number: GB287461957003.