Instruments by Science Group
Macromolecular
Soft Condensed 
Imaging and
Biological
Magnetic
Structures and
Crystallography 
Spectroscopy I12 Contact
Science Group Leader
Julia Parker
Email: [email protected]
Tel: +44 (0)1235 778924
I12 JEEP: Joint Engineering, Environment and Processing
Status: Operational
Beamsize: From 50 micrometer x 50 micrometer to 50 mm x 15 mm (EH1) or 100 mm x 30 mm (EH2)
Energy: 53 – 150 keV
Energy: 53 – 150 keV
Publications
These papers are all based at least in part on data gathered on beamline I12. If you have published a paper based on data from I12 which doesn't appear here, please send a reference (ideally including a DOI) to us.
37 items found for 2024 [total: 575]
An investigation into the Ti-Nb-Ag ternary system for biocompatible superelastic alloys Metals, 14 Dec 2024 DOI: 10.3390/met14121426
Microstructure and damage evolution in short carbon fibre 3D-printed composites during tensile straining Composites Part B: Engineering, 72 Dec 2024 DOI: 10.1016/j.compositesb.2024.112073
Powering the future: the quest for high-performance solid-state batteries Nov 2024
Science Highlight I12-JEEP: Joint Engineering, Environmental and Processing I13-2-Diamond Manchester Imaging
Residual stress reconstruction by amplification of limited measurement data via finite element analysis International Journal Of Mechanical Sciences, Nov 2024 DOI: 10.1016/j.ijmecsci.2024.109803
The effect of athermal omega on the transformation behaviour of Ti-24Nb-4Zr-8Sn (wt%) Materialia, 70 Oct 2024 DOI: 10.1016/j.mtla.2024.102266
Journal Paper I12-JEEP: Joint Engineering, Environmental and Processing
Non-monotonic lattice expansion in zeolitic imidazolate frameworks during heating Chemical Communications, 423 Oct 2024 DOI: 10.1039/D4CC03841J
Journal Paper I12-JEEP: Joint Engineering, Environmental and Processing
X-ray simulations with gVXR as a useful tool for education, data analysis, set-up of CT scans, and scanner development Oct 2024 DOI: 10.1117/12.3025315
Conference Paper DIAD-Dual Imaging and Diffraction Beamline I12-JEEP: Joint Engineering, Environmental and Processing
In situ observation of topotactic linker reorganization in the aperiodic metal–organic framework TRUMOF-1 Journal Of The American Chemical Society, Sept 2024 DOI: 10.1021/jacs.4c09487
Using synchrotron X-ray diffraction and X-ray tomography to study ocean world cryogeochemistry in 4D Sept 2024 DOI: 10.5194/epsc2024-1090
Conference Paper DIAD-Dual Imaging and Diffraction Beamline I11-High Resolution Powder Diffraction I12-JEEP: Joint Engineering, Environmental and Processing open access
Tensile failure mechanisms of historic fibrous plaster ceiling wads: Experiments at the UK Diamond Light Source Sept 2024 DOI: 10.1051/matecconf/202440304005
Depth-resolved mechanical behaviour of shot peened 7050-T7451 aluminium surfaces using in-situ synchrotron X-ray diffraction Materials Science And Engineering: A, 909 Sept 2024 DOI: 10.1016/j.msea.2024.146817
Unravelling dynamic recrystallisation in a microalloyed steel during rapid high temperature deformation using synchrotron X-rays Acta Materialia, 10 Aug 2024 DOI: 10.1016/j.actamat.2024.120265
Journal Paper I12-JEEP: Joint Engineering, Environmental and Processing
Operando study of the dynamic evolution of multiple Fe-rich intermetallics of an Al-Cu based recycled alloy in solidification by synchrotron X-ray and machine learning Acta Materialia, 128 Aug 2024 DOI: 10.1016/j.actamat.2024.120267
Machine-learning-assisted analysis of highly transient X-ray imaging sequences of weld pools Philosophical Magazine Letters, 104 Aug 2024 DOI: 10.1080/09500839.2024.2388159
A micromechanical study of heat treatment induced hardening in α -brass Acta Materialia, 10 Aug 2024 DOI: 10.1016/j.actamat.2024.120277
Investigating grain-resolved evolution of lattice strains during plasticity and creep using 3DXRD and crystal plasticity modelling Acta Materialia, 87 Aug 2024 DOI: 10.1016/j.actamat.2024.120250
Journal Paper I12-JEEP: Joint Engineering, Environmental and Processing
Direct observation of degassing during decompression of basaltic magma Science Advances, 10 Aug 2024 DOI: 10.1126/sciadv.ado2585
The relationship between strain-age cracking and the evolution of γ′ in laser powder-bed-fusion processed Ni-Based superalloys Aug 2024 DOI: 10.1007/978-3-031-63937-1_77
Conference Paper I12-JEEP: Joint Engineering, Environmental and Processing
Mapping of lithium ion concentrations in 3D structures through development of in situ correlative imaging of X-ray Compton scattering-computed tomography Journal Of Synchrotron Radiation, 31 Jul 2024 DOI: 10.1107/S1600577524003382
Microstructural and material property changes in severely deformed Eurofer-97 Materials Characterization, Jul 2024 DOI: 10.1016/j.matchar.2024.114144
Journal Paper I11-High Resolution Powder Diffraction I12-JEEP: Joint Engineering, Environmental and Processing open access
Deflecting lithium dendritic cracks in multi-layered solid electrolytes Joule, 8 Jul 2024 DOI: 10.1016/j.joule.2024.06.024
Journal Paper I12-JEEP: Joint Engineering, Environmental and Processing I13-2-Diamond Manchester Imaging open access
An in situ imaging investigation of the effect of gas flow rates on directed energy deposition Materials & Design, 108 Jul 2024 DOI: 10.1016/j.matdes.2024.113183
Experimental observation of a new attenuation mechanism in hcp-metals that may operate in the Earth's inner core Geochemistry, Geophysics, Geosystems, 25 June 2024 DOI: 10.1029/2023GC011386
Towards the equiaxed grain microstructure in CrMnFeCoNi high‐entropy alloy fabricated by directed energy deposition Advanced Engineering Materials, June 2024 DOI: 10.1002/adem.202301969
Tunable sub-terahertz resonance absorption in high-coercivity magnetodielectric ceramics Materials Horizons, 63 June 2024 DOI: 10.1039/D4MH00389F
Journal Paper I12-JEEP: Joint Engineering, Environmental and Processing
Novel solutions for structural protections: retrofitting impact-vulnerable structures with non-Newtonian polymers May 2024 DOI: 10.1117/12.3014643
Conference Paper I12-JEEP: Joint Engineering, Environmental and Processing
A study of microstructural tensile and fatigue properties coupled with digital image correlation of hybrid manufactured inconel 718 parts by extrusion and powder bed fusion Advanced Engineering Materials, May 2024 DOI: 10.1002/adem.202400098
Journal Paper I12-JEEP: Joint Engineering, Environmental and Processing
Correlating lithium-ion transport and interfacial lithium microstructure evolution in solid-state batteries during the first cycle Cell Reports Physical Science, 381 May 2024 DOI: 10.1016/j.xcrp.2024.101995
Revealing in situ stress-induced short- and medium-range atomic structure evolution in a multicomponent metallic glassy alloy Acta Materialia, 15 Apr 2024 DOI: 10.1016/j.actamat.2024.119917
In-situ synchrotron investigation of the elastic and tensile properties of oxide dispersion strengthened EUROFER97 steel Acta Materialia, 45 Apr 2024 DOI: 10.1016/j.actamat.2024.119876
Adaptive automated sinogram normalization for ring artifacts suppression in CT Optics Express, 32 Apr 2024 DOI: 10.1364/OE.522941
AM-SegNet for additive manufacturing in situ X-ray image segmentation and feature quantification Virtual And Physical Prototyping, 19 Mar 2024 DOI: 10.1080/17452759.2024.2325572
Journal Paper I12-JEEP: Joint Engineering, Environmental and Processing I13-2-Diamond Manchester Imaging open access
Development and application of 3D X-ray diffraction for the study of phase transformations in metallic materials Mar 2024
Thesis I12-JEEP: Joint Engineering, Environmental and Processing
Understanding the room temperature recovery behaviour in a Ti-24Nb-4Zr-8Sn superelastic alloy Advanced Engineering Materials, Mar 2024 DOI: 10.1002/adem.202400076
The battery failure databank: Insights from an open-access database of thermal runaway behaviors of Li-ion cells and a resource for benchmarking risks Journal Of Power Sources, 597 Mar 2024 DOI: 10.1016/j.jpowsour.2024.234106
Revealing per-grain and neighbourhood stress interactions of a deforming ferritic steel via three-dimensional X-ray diffraction Communications Materials, 5 Mar 2024 DOI: 10.1038/s43246-024-00466-8
Effect of nitrogen atmosphere on the printability, microstructure, precipitation, and mechanical properties of laser powder bed fused Fe-xCr alloys Additive Manufacturing, 230 Mar 2024 DOI: 10.1016/j.addma.2024.104077
Journal Paper I12-JEEP: Joint Engineering, Environmental and Processing
- Ayush Prasad, Nicole L. Church, Nicholas G. Jones, "An investigation into the Ti-Nb-Ag ternary system for biocompatible superelastic alloys", Metals, 14 (2024), DOI: 10.3390/met14121426
- José Humberto S. Almeida, Arttu Miettinen, Fabien Leonard, Brian G. Falzon, Philip J. Withers, "Microstructure and damage evolution in short carbon fibre 3D-printed composites during tensile straining", Composites Part B: Engineering, 72 (2024), DOI: 10.1016/j.compositesb.2024.112073
- [Science Highlight] Diamond Light Source, "Powering the future: the quest for high-performance solid-state batteries" (2024)
- S. Mckendrey, X. Van Heule, R. Ramadhan, W. Kockelmann, H. E. Coules, C. Jacquemoud, D. Knowles, M. Mostafavi, "Residual stress reconstruction by amplification of limited measurement data via finite element analysis", International Journal Of Mechanical Sciences (2024), DOI: 10.1016/j.ijmecsci.2024.109803
- N. L. Church, J. Y. Ang, O. G. Reed, O. E. Gibson, N. G. Jones, "The effect of athermal omega on the transformation behaviour of Ti-24Nb-4Zr-8Sn (wt%)", Materialia, 70 (2024), DOI: 10.1016/j.mtla.2024.102266
- Wessel M. W. Winters, Rasmus S. K. Madsen, Oxana V. Magdysyuk, Yuanzheng Yue, "Non-monotonic lattice expansion in zeolitic imidazolate frameworks during heating", Chemical Communications, 423 (2024), DOI: 10.1039/D4CC03841J
- [Conference Paper] Franck P. Vidal, Shaghayegh Afshari, Sharif Ahmed, Carolyn Atkins, Eric Béchet, Alberto Corbi Bellot, Stefan Bosse, Younes Chahid, Cheng-Ying Chou, Robert Culver, Lewis Dixon, Johan Friemann, Amin Garbout, Clémentine Hatton, Audrey Henry, Christophe Leblanc, Alberto Leonardi, Jean Michel Létang, Harry Lipscom, Tristan Manchester, Bas Meere, Simon Middleburgh, Iwan Mitchell, Liam Perera, Marti Puig Fantauzzi, Jenna Tugwell-Allsup, "X-ray simulations with gVXR as a useful tool for education, data analysis, set-up of CT scans, and scanner development" (2024), DOI: 10.1117/12.3025315
- Guy Greenbaum, Patrick W. Doheny, Robert A. I. Paraoan, Yevheniia Kholina, Stefan Michalik, Simon J. Cassidy, Hamish H.-M. Yeung, Andrew L. Goodwin, "In situ observation of topotactic linker reorganization in the aperiodic metal–organic framework TRUMOF-1", Journal Of The American Chemical Society (2024), DOI: 10.1021/jacs.4c09487
- [Conference Paper] Liam Perera, Sarah Day, Stephen Thompson, Alberto Leonardi, Sharif Ahmed, "Using synchrotron X-ray diffraction and X-ray tomography to study ocean world cryogeochemistry in 4D" (2024), DOI: 10.5194/epsc2024-1090
- [Conference Paper] Jiaxu Zuo, Kutsi Akcicek, Shivansh Nauriyal, Barrie Dams, Stefan Michalik, Thomas Zillhardt, Martin Ansell, Richard Ball, Genoveva Burca, Brian Sheil, James Marrow, Sinan Acikgoz, "Tensile failure mechanisms of historic fibrous plaster ceiling wads: Experiments at the UK Diamond Light Source" (2024), DOI: 10.1051/matecconf/202440304005
- A. Madariaga, E. Vázquez, Daniel Foster, E. Jimenez-Melero, "Depth-resolved mechanical behaviour of shot peened 7050-T7451 aluminium surfaces using in-situ synchrotron X-ray diffraction", Materials Science And Engineering: A, 909 (2024), DOI: 10.1016/j.msea.2024.146817
- Kai Zhang, Tim Wigger, Rosa Pineda, Simon A. Hunt, Ben Thomas, Thomas Kwok, David Dye, Gorka Plata, Jokin Lozares, Inaki Hurtado, Stefan Michalik, Michael Preuss, Peter D. Lee, Mohammed A. Azeem, "Unravelling dynamic recrystallisation in a microalloyed steel during rapid high temperature deformation using synchrotron X-rays", Acta Materialia, 10 (2024), DOI: 10.1016/j.actamat.2024.120265
- Kang Xiang, Ling Qin, Yuliang Zhao, Shi Huang, Wenjia Du, Elodie Boller, Alexander Rack, Mengnie Li, Jiawei Mi, "Operando study of the dynamic evolution of multiple Fe-rich intermetallics of an Al-Cu based recycled alloy in solidification by synchrotron X-ray and machine learning", Acta Materialia, 128 (2024), DOI: 10.1016/j.actamat.2024.120267
- Fan Wu, Juzheng Zhang, Ken Vidar Falch, Wajira Mirihanage, "Machine-learning-assisted analysis of highly transient X-ray imaging sequences of weld pools", Philosophical Magazine Letters, 104 (2024), DOI: 10.1080/09500839.2024.2388159
- Jonathan Birch, Emily Jenkins, Anastasia Vrettou, Mohammed Said, Himanshu Vashishtha, Thomas Connolley, Jeff Brooks, David Collins, "A micromechanical study of heat treatment induced hardening in α -brass", Acta Materialia, 10 (2024), DOI: 10.1016/j.actamat.2024.120277
- Farhan Ashraf, Ranggi S. Ramadhan, Abdullah Al Mamun, James A. D. Ball, Eralp Demir, Thomas Connolley, David M. Collins, Mahmoud Mostafavi, David Knowles, "Investigating grain-resolved evolution of lattice strains during plasticity and creep using 3DXRD and crystal plasticity modelling", Acta Materialia, 87 (2024), DOI: 10.1016/j.actamat.2024.120250
- Barbara Bonechi, Margherita Polacci, Fabio Arzilli, Giuseppe La Spina, Jean-Louis Hazemann, Richard A. Brooker, Robert Atwood, Sebastian Marussi, Peter D. Lee, Roy A. Wogelius, Jonathan Fellowes, Mike R. Burton, "Direct observation of degassing during decompression of basaltic magma", Science Advances, 10 (2024), DOI: 10.1126/sciadv.ado2585
- [Conference Paper] J. F. S. Markanday, N. D’souza, N. L. Church, J. R. Miller, J. J. C. Pitchforth, L. D. Connor, S. Michalik, B. Roebuck, N. G. Jones, K. A. Christofidou, H. J. Stone, "The relationship between strain-age cracking and the evolution of γ′ in laser powder-bed-fusion processed Ni-Based superalloys" (2024), DOI: 10.1007/978-3-031-63937-1_77
- Chu Lun Alex Leung, Matthew D. Wilson, Thomas Connolley, Chun Huang, "Mapping of lithium ion concentrations in 3D structures through development of in situ correlative imaging of X-ray Compton scattering-computed tomography", Journal Of Synchrotron Radiation, 31 (2024), DOI: 10.1107/S1600577524003382
- Kay Song, Guanze He, Abdallah Reza, Tamas Ungar, Phani Karamched, David Yang, Ivan Tolkachev, Kenichiro Mizohata, Stephen P. Thompson, Eamonn T. Connolly, Robert C. Atwood, Stefan Michalik, David E. J. Armstrong, Felix Hofmann, "Microstructural and material property changes in severely deformed Eurofer-97", Materials Characterization (2024), DOI: 10.1016/j.matchar.2024.114144
- Bingkun Hu, Shengming Zhang, Ziyang Ning, Dominic Spencer-Jolly, Dominic L. R. Melvin, Xiangwen Gao, Johann Perera, Shengda D. Pu, Gregory J. Rees, Longlong Wang, Lechen Yang, Hui Gao, Shashidhara Marathe, Genoveva Burca, T. James Marrow, Peter G. Bruce, "Deflecting lithium dendritic cracks in multi-layered solid electrolytes", Joule, 8 (2024), DOI: 10.1016/j.joule.2024.06.024
- Lorna Sinclair, Oliver Hatt, Samuel J. Clark, Sebastian Marussi, Elena Ruckh, Robert C. Atwood, Martyn Jones, Gavin J. Baxter, Chu Lun Alex Leung, Iain Todd, Peter D. Lee, "An in situ imaging investigation of the effect of gas flow rates on directed energy deposition", Materials & Design, 108 (2024), DOI: 10.1016/j.matdes.2024.113183
- Simon A. Hunt, Andrew M. Walker, Oliver T. Lord, Stephen Stackhouse, Lewis Schardong, Lora S. Armstrong, Andrew J. Parsons, Geoffrey E. Lloyd, John Wheeler, Danielle M. Fenech, Stefan Michalik, Matthew L. Whitaker, "Experimental observation of a new attenuation mechanism in hcp-metals that may operate in the Earth's inner core", Geochemistry, Geophysics, Geosystems, 25 (2024), DOI: 10.1029/2023GC011386
- Minsoo Jin, Yunhui Chen, Bogdan Dovgyy, Peter Lee, Minh-Son Pham, "Towards the equiaxed grain microstructure in CrMnFeCoNi high‐entropy alloy fabricated by directed energy deposition", Advanced Engineering Materials (2024), DOI: 10.1002/adem.202301969
- Evgeny A. Gorbachev, Liudmila N. Alyabyeva, Artem V. Pronin, Alexandra S. Sultanovskaya, Ekaterina S. Kozlyakova, Oxana V. Magdysyuk, Ilya V. Roslyakov, Martin Dressel, Boris P. Gorshunov, Lev A. Trusov, "Tunable sub-terahertz resonance absorption in high-coercivity magnetodielectric ceramics", Materials Horizons, 63 (2024), DOI: 10.1039/D4MH00389F
- [Conference Paper] Omar Elhawary, Mohamed A. Amjard, Chanel Fallon, Alexander J. G. Lunt, Fulvio Pinto, "Novel solutions for structural protections: retrofitting impact-vulnerable structures with non-Newtonian polymers" (2024), DOI: 10.1117/12.3014643
- Simon Malej, Joel Larsson, Johannes Gumpinger, Ana Brandão, Emilie Beevers, Tommaso Ghidini, Joe Bennett, Luca Patriarca, Wael Abuzaid, Stefano Beretta, "A study of microstructural tensile and fatigue properties coupled with digital image correlation of hybrid manufactured inconel 718 parts by extrusion and powder bed fusion", Advanced Engineering Materials (2024), DOI: 10.1002/adem.202400098
- Chun Huang, Matthew D. Wilson, Ben Cline, Abeiram Sivarajah, Wiebe Stolpe, Matthieu N. Boone, Thomas Connolley, Chu Lun Alex Leung, "Correlating lithium-ion transport and interfacial lithium microstructure evolution in solid-state batteries during the first cycle", Cell Reports Physical Science, 381 (2024), DOI: 10.1016/j.xcrp.2024.101995
- Shifeng Luo, Jia Chuan Khong, Shi Huang, Guangyu Yang, Jiawei Mi, "Revealing in situ stress-induced short- and medium-range atomic structure evolution in a multicomponent metallic glassy alloy", Acta Materialia, 15 (2024), DOI: 10.1016/j.actamat.2024.119917
- Tay Sparks, Slava Kuksenko, Michael Gorley, Jan Hoffmann, Yu-Lung Chiu, Thomas Connolley, Michael Rieth, Yiqiang Wang, Biao Cai, "In-situ synchrotron investigation of the elastic and tensile properties of oxide dispersion strengthened EUROFER97 steel", Acta Materialia, 45 (2024), DOI: 10.1016/j.actamat.2024.119876
- Danil Kazimirov, Dmitry Polevoy, Anastasia Ingacheva, Marina Chukalina, Dmitry Nikolaev, "Adaptive automated sinogram normalization for ring artifacts suppression in CT", Optics Express, 32 (2024), DOI: 10.1364/OE.522941
- Wei Li, Rubén Lambert-Garcia, Anna C. M. Getley, Kwan Kim, Shishira Bhagavath, Marta Majkut, Alexander Rack, Peter D. Lee, Chu Lun Alex Leung, "AM-SegNet for additive manufacturing in situ X-ray image segmentation and feature quantification", Virtual And Physical Prototyping, 19 (2024), DOI: 10.1080/17452759.2024.2325572
- [Thesis] James Ball, "Development and application of 3D X-ray diffraction for the study of phase transformations in metallic materials" (2024)
- O. G. Reed, N. L. Church, N. G. Jones, "Understanding the room temperature recovery behaviour in a Ti-24Nb-4Zr-8Sn superelastic alloy", Advanced Engineering Materials (2024), DOI: 10.1002/adem.202400076
- Donal P. Finegan, Julia Billman, Jacob Darst, Peter Hughes, Jesus Trillo, Matt Sharp, Alex Benson, Martin Pham, Inez Kesuma, Mark Buckwell, Hamish T. Reid, Charlie Kirchner-Burles, Matilda Fransson, David Petrushenko, Thomas M. M. Heenan, Rhodri Jervis, Rhodri Owen, Drasti Patel, Ludovic Broche, Alexander Rack, Oxana Magdysyuk, Matt Keyser, William Walker, Paul Shearing, Eric Darcy, "The battery failure databank: Insights from an open-access database of thermal runaway behaviors of Li-ion cells and a resource for benchmarking risks", Journal Of Power Sources, 597 (2024), DOI: 10.1016/j.jpowsour.2024.234106
- James A. D. Ball, Anna Kareer, Oxana V. Magdysyuk, Stefan Michalik, Thomas Connolley, David Collins, "Revealing per-grain and neighbourhood stress interactions of a deforming ferritic steel via three-dimensional X-ray diffraction", Communications Materials, 5 (2024), DOI: 10.1038/s43246-024-00466-8
- Siyuan Wei, Delvin Wuu, Verner Soh, Kwang Boon Lau, Fengxia Wei, Konstantinos A. Liogas, Baicheng Zhang, Qiang Zhu, Chee Koon Ng, Alexander M. Korsunsky, Pei Wang, Upadrasta Ramamurty, "Effect of nitrogen atmosphere on the printability, microstructure, precipitation, and mechanical properties of laser powder bed fused Fe-xCr alloys", Additive Manufacturing, 230 (2024), DOI: 10.1016/j.addma.2024.104077
Diamond Light Source is the UK's national synchrotron science facility, located at the Harwell Science and Innovation Campus in Oxfordshire.
Diamond Light Source Ltd
Diamond House
Harwell Science & Innovation Campus
Didcot
Oxfordshire
OX11 0DE
Copyright © Diamond Light Source. Diamond Light Source® and the Diamond logo are registered trademarks of Diamond Light Source Ltd
Registered in England and Wales at Diamond House, Harwell Science and Innovation Campus, Didcot, Oxfordshire, OX11 0DE, United Kingdom. Company number: 4375679. VAT number: 287 461 957. Economic Operators Registration and Identification (EORI) number: GB287461957003.