Instruments by Science Group
Macromolecular
Soft Condensed 
Imaging and
Biological
Magnetic
Structures and
Crystallography 
Spectroscopy I12 Contact
Science Group Leader
Julia Parker
Email: [email protected]
Tel: +44 (0)1235 778924
I12 JEEP: Joint Engineering, Environment and Processing
Status: Operational
Beamsize: From 50 micrometer x 50 micrometer to 50 mm x 15 mm (EH1) or 100 mm x 30 mm (EH2)
Energy: 53 – 150 keV
Energy: 53 – 150 keV
Publications
These papers are all based at least in part on data gathered on beamline I12. If you have published a paper based on data from I12 which doesn't appear here, please send a reference (ideally including a DOI) to us.
25 items found for 2013 [total: 575]
Synchrotron tomographic characterization of damage evolution during aluminum alloy solidification Metallurgical And Materials Transactions A, 44 (12) Dec 2013 DOI: 10.1007/s11661-012-1563-0
Journal Paper I12-JEEP: Joint Engineering, Environmental and Processing
Studying the synthesis and reactivity of crystalline materials using in situ X-ray diffraction. Dec 2013
Thesis I12-JEEP: Joint Engineering, Environmental and Processing
A new parameter for modelling three-dimensional damage evolution validated by synchrotron tomography Acta Materialia, 61 (20) Dec 2013 DOI: 10.1016/j.actamat.2013.08.065
Journal Paper I12-JEEP: Joint Engineering, Environmental and Processing
3D studies of indentation by combined X-ray tomography and digital volume correlation Key Engineering Materials, 592-593 Nov 2013 DOI: 10.4028/www.scientific.net/KEM.592-593.14
Journal Paper I12-JEEP: Joint Engineering, Environmental and Processing
Complete elliptical ring geometry provides energy and instrument calibration for synchrotron-based two-dimensional X-ray diffraction Journal Of Applied Crystallography, 46 Oct 2013 DOI: 10.1107/S0021889813022437
3D cellular automata finite element (CAFE) modelling and experimental observation of damage in quasi-brittle nuclear materials: Indentation of a SiC-SiC fibre ceramic matrix composite Oct 2013
Conference Paper I12-JEEP: Joint Engineering, Environmental and Processing
Hierarchical tailoring of strut architecture to control permeability of additive manufactured titanium implants Materials Science And Engineering: C, 33 (7) Oct 2013 DOI: 10.1016/j.msec.2013.05.050
Journal Paper I12-JEEP: Joint Engineering, Environmental and Processing
Texture analysis in cubic phase polycrystals by single exposure synchrotron X-ray diffraction Journal Of Applied Physics, 114 (16) Oct 2013 DOI: 10.1063/1.4825120
Journal Paper I12-JEEP: Joint Engineering, Environmental and Processing
Residual stresses in Linear Friction Welding of aluminium alloys Materials & Design, 50 Sept 2013 DOI: 10.1016/j.matdes.2013.03.051
Journal Paper I12-JEEP: Joint Engineering, Environmental and Processing
An experimental procedure to determine the interaction between applied loads and residual stresses Sept 2013 DOI: 10.4028/www.scientific.net/MSF.768-769.733
Conference Paper I12-JEEP: Joint Engineering, Environmental and Processing
The application of geometry corrections for Diffraction Strain Tomography (DST) analysis of a Ni-base superalloy blade Powder Diffraction, 28 Sept 2013 DOI: 10.1017/S0885715613000857
Journal Paper I12-JEEP: Joint Engineering, Environmental and Processing
Analysis of preferred orientations in Linear Friction Welded (LFW) aluminium alloy specimens using “one-shot” multi-element energy dispersive synchrotron X-ray diffraction Powder Diffraction, 28 Sept 2013 DOI: 10.1017/S0885715613000948
Journal Paper I12-JEEP: Joint Engineering, Environmental and Processing
Synchrotron X-ray studies of atmospheric pitting corrosion of stainless steel Aug 2013
Thesis I12-JEEP: Joint Engineering, Environmental and Processing I18-Microfocus Spectroscopy
Three-dimensional crack observation, quantification and simulation in a quasi-brittle material Acta Materialia, 61 (16) Aug 2013 DOI: 10.1016/j.actamat.2013.07.011
Journal Paper I12-JEEP: Joint Engineering, Environmental and Processing
A modelling approach to yield strength optimisation in a nickel-base superalloy International Journal Of Plasticity, 54 Aug 2013 DOI: 10.1016/j.ijplas.2013.08.009
Journal Paper I12-JEEP: Joint Engineering, Environmental and Processing
Verification of material models for residual stress modification in SiC fiber-reinhibited titanium alloys by means of synchrotron radiation Jul 2013
Conference Paper I12-JEEP: Joint Engineering, Environmental and Processing
The origin of crack formation in SiC fibre reinforces multi metal matrix composites investigated by synchrotron radiation Jul 2013
Conference Paper I12-JEEP: Joint Engineering, Environmental and Processing
Measurement of elastic follow-up for combined applied and residual stresses Jul 2013 DOI: 10.1115/PVP2013-97624
Conference Paper I12-JEEP: Joint Engineering, Environmental and Processing
Thermal processing and crystallization of amorphous Mg-Ca silicates Meteoritics & Planetary Science, 48 (8) Jul 2013 DOI: 10.1111/maps.12162
Journal Paper I11-High Resolution Powder Diffraction I12-JEEP: Joint Engineering, Environmental and Processing
Photoluminescence in amorphous MgSiO3 silicate Monthly Notices Of The Royal Astronomical Society, 434 (3) Jul 2013 DOI: 10.1093/mnras/stt1203
Journal Paper I11-High Resolution Powder Diffraction I12-JEEP: Joint Engineering, Environmental and Processing
3D studies of indentation by combined X-ray tomography and digitalvolume correlation Jul 2013
Conference Paper I12-JEEP: Joint Engineering, Environmental and Processing
A feasibility study of dynamic stress analysis inside a running internal combustion engine using synchrotron X-ray beams Journal Of Synchrotron Radiation, 20 Mar 2013 DOI: 10.1107/S0909049513000885
Journal Paper I12-JEEP: Joint Engineering, Environmental and Processing
In situ study of the evolution of atomic strain of bulk metallic glass and its effects on shear band formation Scripta Materialia, 69 (3) Mar 2013 DOI: 10.1016/j.scriptamat.2013.03.016
Journal Paper I12-JEEP: Joint Engineering, Environmental and Processing
Synchrotron X-ray diffraction monitoring of the operation of an inert anode utilized in a cambridge FFC-Cell Ecs Transactions, 50 (11) Mar 2013 DOI: 10.1149/05011.0045ecst
Journal Paper I12-JEEP: Joint Engineering, Environmental and Processing
A kinetic and mechanistic study into the formation of the Cu-Cr layered double hydroxide Physical Chemistry Chemical Physics, 15 Feb 2013 DOI: 10.1039/c3cp44339f
Journal Paper I12-JEEP: Joint Engineering, Environmental and Processing
- Chedtha Puncreobutr, Richard W. Hamilton, Biao Cai, Thomas Connolley, Peter D. Lee, "Synchrotron tomographic characterization of damage evolution during aluminum alloy solidification", Metallurgical And Materials Transactions A, 44 (12), 5389-5395 (2013), DOI: 10.1007/s11661-012-1563-0
- [Thesis] Saul Moorhouse, "Studying the synthesis and reactivity of crystalline materials using in situ X-ray diffraction." (2013)
- M. Kaye, C. Puncreobutr, D. S. Balint, T. Connolley, D. Farrugia, J. Lin, P. D. Lee, "A new parameter for modelling three-dimensional damage evolution validated by synchrotron tomography", Acta Materialia, 61 (20), 7616 - 7623 (2013), DOI: 10.1016/j.actamat.2013.08.065
- Mahmoud Mostafavi, Yelena Vertyagina, Christina Reinhard, Robert Bradley, Xia Jiang, Marina Galano, James Marrow, "3D studies of indentation by combined X-ray tomography and digital volume correlation", Key Engineering Materials, 592-593, 14 - 21 (2013), DOI: 10.4028/www.scientific.net/KEM.592-593.14
- Michael L. Hart, Michael Drakopoulos, Christina Reinhard, Thomas Connolley, "Complete elliptical ring geometry provides energy and instrument calibration for synchrotron-based two-dimensional X-ray diffraction", Journal Of Applied Crystallography, 46, 1249 - 1260 (2013), DOI: 10.1107/S0021889813022437
- [Conference Paper] Luis Saucedo Mora, Mahmoud Mostafavi, Danial Khoshkhou, Christina Reinhard, Robert Atwood, Shuang Zhao, Brian Connolly, James Marrow, "3D cellular automata finite element (CAFE) modelling and experimental observation of damage in quasi-brittle nuclear materials: Indentation of a SiC-SiC fibre ceramic matrix composite" (2013)
- Z. Zhang, D. Jones, S. Yue, P. D. Lee, J. R. Jones, C. J. Sutcliffe, E. Jones, "Hierarchical tailoring of strut architecture to control permeability of additive manufactured titanium implants", Materials Science And Engineering: C, 33 (7), 4055 - 4062 (2013), DOI: 10.1016/j.msec.2013.05.050
- M. Y. Xie, N. Baimpas, C. Reinhard, A. M. Korsunsky, "Texture analysis in cubic phase polycrystals by single exposure synchrotron X-ray diffraction", Journal Of Applied Physics, 114 (16), 163502 (2013), DOI: 10.1063/1.4825120
- X. Song, M. Xie, F. Hofmann, T. S. Jun, T. Connolley, C. Reinhard, R. C. Atwood, L. Connor, M. Drakopoulos, S. Harding, A. Korsunsky, "Residual stresses in Linear Friction Welding of aluminium alloys", Materials & Design, 50, 360-369 (2013), DOI: 10.1016/j.matdes.2013.03.051
- [Conference Paper] Graeme Horne, Matthew Peel, Danie Hattingh, Thomas Connolley, Mike Hart, Joe Kelleher, Shu Yan Zhang, David Smith, "An experimental procedure to determine the interaction between applied loads and residual stresses" (2013), DOI: 10.4028/www.scientific.net/MSF.768-769.733
- Nikolaos Baimpas, Mengyin Xie, Christina Reinhard, Alexander Korsunsky, "The application of geometry corrections for Diffraction Strain Tomography (DST) analysis of a Ni-base superalloy blade", Powder Diffraction, 28, S436 - S447 (2013), DOI: 10.1017/S0885715613000857
- Mengyin Xie, Terry Jun, Alexander Korsunsky, Michael Drakopoulos, "Analysis of preferred orientations in Linear Friction Welded (LFW) aluminium alloy specimens using “one-shot” multi-element energy dispersive synchrotron X-ray diffraction", Powder Diffraction, 28, S327 - S332 (2013), DOI: 10.1017/S0885715613000948
- [Thesis] Na Mi, "Synchrotron X-ray studies of atmospheric pitting corrosion of stainless steel" (2013)
- M. Mostafavi, N. Baimpas, E. Tarleton, R Atwood, S. Mcdonald, A. Korsunsky, J. Marrow, "Three-dimensional crack observation, quantification and simulation in a quasi-brittle material", Acta Materialia, 61 (16), 62766289 (2013), DOI: 10.1016/j.actamat.2013.07.011
- D. M. Collins, H. J. Stone, "A modelling approach to yield strength optimisation in a nickel-base superalloy", International Journal Of Plasticity, 54, 96-112 (2013), DOI: 10.1016/j.ijplas.2013.08.009
- [Conference Paper] Joachim Hausmann, Joachim Gussone, Christina Reinhard, "Verification of material models for residual stress modification in SiC fiber-reinhibited titanium alloys by means of synchrotron radiation" (2013)
- [Conference Paper] Christina Reinhard, Joachim Gussone, Galina Kasperovich, Joachim Hausmann, Tarik Merzouk, Human Gherekhloo, "The origin of crack formation in SiC fibre reinforces multi metal matrix composites investigated by synchrotron radiation" (2013)
- [Conference Paper] Graeme Horne, Matthew Peel, David Smith, "Measurement of elastic follow-up for combined applied and residual stresses" (2013), DOI: 10.1115/PVP2013-97624
- Sarah J. Day, Stephen P. Thompson, Aneurin Evans, Julia Parker, Leigh Connor, Chiu Tang, "Thermal processing and crystallization of amorphous Mg-Ca silicates", Meteoritics & Planetary Science, 48 (8), 1459-–1471 (2013), DOI: 10.1111/maps.12162
- S. P. Thompson, J. E. Parker, S. J. Day, L. D. Connor, A. Evans, "Photoluminescence in amorphous MgSiO3 silicate", Monthly Notices Of The Royal Astronomical Society, 434 (3), 2582-2592 (2013), DOI: 10.1093/mnras/stt1203
- [Conference Paper] Mahmoud Mostafavi, Yelena Vertyagina, Christina Reinhard, Robert Bradley, Xia Jiang, Marina Galano, James Marrow, "3D studies of indentation by combined X-ray tomography and digitalvolume correlation" (2013)
- Nikolaos Baimpas, Michael Drakopoulos, Thomas Connolley, Xu Song, Costas Pandazaras, Alexander Korsunsky, "A feasibility study of dynamic stress analysis inside a running internal combustion engine using synchrotron X-ray beams", Journal Of Synchrotron Radiation, 20 (2013), DOI: 10.1107/S0909049513000885
- Y. J. Huang, J. C.. Khong, J. Mi, Thomas Connolley, "In situ study of the evolution of atomic strain of bulk metallic glass and its effects on shear band formation", Scripta Materialia, 69 (3), 207-–210 (2013), DOI: 10.1016/j.scriptamat.2013.03.016
- G. A. Snook, M. R. Rowles, M. J. Styles, K. Mcgregor, I. C. Madsen, A. J. Urban, N. V. Y. Scarlett, D. P. Riley, "Synchrotron X-ray diffraction monitoring of the operation of an inert anode utilized in a cambridge FFC-Cell", Ecs Transactions, 50 (11), 45 - 56 (2013), DOI: 10.1149/05011.0045ecst
- Gareth Williams, Alexander Clout, Jonathan Burley, "A kinetic and mechanistic study into the formation of the Cu-Cr layered double hydroxide", Physical Chemistry Chemical Physics, 15, 8616-8628 (2013), DOI: 10.1039/c3cp44339f
Diamond Light Source is the UK's national synchrotron science facility, located at the Harwell Science and Innovation Campus in Oxfordshire.
Diamond Light Source Ltd
Diamond House
Harwell Science & Innovation Campus
Didcot
Oxfordshire
OX11 0DE
Copyright © Diamond Light Source. Diamond Light Source® and the Diamond logo are registered trademarks of Diamond Light Source Ltd
Registered in England and Wales at Diamond House, Harwell Science and Innovation Campus, Didcot, Oxfordshire, OX11 0DE, United Kingdom. Company number: 4375679. VAT number: 287 461 957. Economic Operators Registration and Identification (EORI) number: GB287461957003.