Instruments by Science Group
Macromolecular
Soft Condensed 
Imaging and
Biological
Magnetic
Structures and
Crystallography 
Spectroscopy I12 Contact
Science Group Leader
Julia Parker
Email: [email protected]
Tel: +44 (0)1235 778924
I12 JEEP: Joint Engineering, Environment and Processing
Status: Operational
Beamsize: From 50 micrometer x 50 micrometer to 50 mm x 15 mm (EH1) or 100 mm x 30 mm (EH2)
Energy: 53 – 150 keV
Energy: 53 – 150 keV
Publications
These papers are all based at least in part on data gathered on beamline I12. If you have published a paper based on data from I12 which doesn't appear here, please send a reference (ideally including a DOI) to us.
49 items found for 2023 [total: 575]
Development of a novel Ti-Nb-Au superelastic alloy with exceptionally low elastic modulus Materials Research Letters, 12 Dec 2023 DOI: 10.1080/21663831.2023.2287072
Synchrotron x‐ray diffraction for sealed Mars Sample Return sample tubes Meteoritics & Planetary Science, 2678 Dec 2023 DOI: 10.1111/maps.14105
Heitt Mjölnir: a heated miniature triaxial apparatus for 4D synchrotron microtomography Journal Of Synchrotron Radiation, 31 Dec 2023 DOI: 10.1107/S1600577523009876
Investigation of ductile damage in dual phase steel during tensile deformation by in situ X-ray computed tomography Engineering Fracture Mechanics, 46 Nov 2023 DOI: 10.1016/j.engfracmech.2023.109711
Correlative non-destructive techniques to investigate aging and orientation effects in automotive Li-ion pouch cells Joule, 7 Nov 2023 DOI: 10.1016/j.joule.2023.10.011
Microstructural stability and evolution in a new polycrystalline Ni-base superalloy Metallurgical And Materials Transactions A, 64 Nov 2023 DOI: 10.1007/s11661-023-07211-9
Conditional generative adversarial networks for stripe artefact removal in high-resolution X-ray tomography Tomography Of Materials And Structures, 1 Nov 2023 DOI: 10.1016/j.tmater.2023.100019
In situ characterisation of surface roughness and its amplification during multilayer single-track laser powder bed fusion additive manufacturing Additive Manufacturing, 59 Oct 2023 DOI: 10.1016/j.addma.2023.103809
The interdependence of the thermal and mechanical cycling behaviour in Ti2448 (Ti–24Nb–4Zr–8Sn, wt%) Materials Science And Engineering: A, 8 Oct 2023 DOI: 10.1016/j.msea.2023.145791
Mitigating high temperature hydrogen attack with interphase precipitation International Journal Of Hydrogen Energy, 44 Oct 2023 DOI: 10.1016/j.ijhydene.2023.09.179
Reactivation of natural deformation bands in upper crustal sedimentary rocks: insights from laboratory-induced deformation with 4D X-ray tomography Oct 2023
Conference Paper I12-JEEP: Joint Engineering, Environmental and Processing
Effect of prior processing on the decomposition of the β phase in Ti–Nb alloys during intermediate heat treatments Scripta Materialia, 238 Sept 2023 DOI: 10.1016/j.scriptamat.2023.115729
In-situ investigation of dynamic precipitation in pre-aged Al-Zn-Mg-Cu alloy AA7075 Journal Of Alloys And Compounds, 47 Sept 2023 DOI: 10.1016/j.jallcom.2023.172098
Phases evolution in additive manufactured TRIP custom 17-4PH alloy: opportunities for energy absorption applications Sept 2023
Conference Paper I12-JEEP: Joint Engineering, Environmental and Processing
Voxel-based full-field eigenstrain reconstruction of residual stresses in additive manufacturing parts using height digital image correlation Additive Manufacturing, 77 Sept 2023 DOI: 10.1016/j.addma.2023.103822
Journal Paper B16-Test Beamline I12-JEEP: Joint Engineering, Environmental and Processing open access
Evolution and formation of dissimilar metal interfaces in fusion welding Acta Materialia, 257 Aug 2023 DOI: 10.1016/j.actamat.2023.119232
Amorphous solid dispersions of lidocaine and lidocaine HCl produced by ball milling with well-defined RAFT-synthesised methacrylic acid polymers International Journal Of Pharmaceutics, 12 Aug 2023 DOI: 10.1016/j.ijpharm.2023.123291
Assessment of residual strain in laser shock peened additive manufactured Inconel 718 using synchrotron x-ray diffraction Materialia, 5 Jul 2023 DOI: 10.1016/j.mtla.2023.101843
Exploring 3D X-ray diffraction method to validate approaches in materials modelling Jul 2023 DOI: 10.1115/PVP2023-106248
Conference Paper I12-JEEP: Joint Engineering, Environmental and Processing
Polymorphic transitions in flufenamic acid-trehalose composites International Journal Of Pharmaceutics: X, 64 Jul 2023 DOI: 10.1016/j.ijpx.2023.100200
Thermoelectric magnetohydrodynamic control of melt pool flow during laser directed energy deposition additive manufacturing Additive Manufacturing, 71 June 2023 DOI: 10.1016/j.addma.2023.103587
Evidence of dislocation dependent behaviour in superelastic Ti2448 (Ti-24Nb-4Zr-8Sn, wt%) Acta Materialia, 57 June 2023 DOI: 10.1016/j.actamat.2023.119066
A scalable neural network architecture for self-supervised tomographic image reconstruction Digital Discovery, 2 June 2023 DOI: 10.1039/D2DD00105E
In situ monitoring the effects of Ti6Al4V powder oxidation during laser powder bed fusion additive manufacturing International Journal Of Machine Tools And Manufacture, 139 June 2023 DOI: 10.1016/j.ijmachtools.2023.104049
Controlling solute channel formation using magnetic fields Acta Materialia, 379 June 2023 DOI: 10.1016/j.actamat.2023.119107
The Influence of manganese addition on the properties of biodegradable zinc-manganese-calcium alloys Materials, 16 June 2023 DOI: 10.3390/ma16134655
In situ studies of α” evolution during cyclic testing of Ti-24Nb-4Zr-8Sn June 2023
Conference Paper I12-JEEP: Joint Engineering, Environmental and Processing
The nature, evolution and effect of the omega phase in Ti-15Mo (wt.%) June 2023
Conference Paper I12-JEEP: Joint Engineering, Environmental and Processing
The transformation behaviour of Ti-Nb based alloys following low temperature thermal treatments June 2023
Conference Paper I12-JEEP: Joint Engineering, Environmental and Processing
Understanding the transformation behaviour of metastable beta alloys June 2023
Conference Paper I12-JEEP: Joint Engineering, Environmental and Processing
Understanding the role and effects of ω precipitation on the mechanical properties of metastable β-Ti alloys June 2023
Conference Paper I12-JEEP: Joint Engineering, Environmental and Processing
3-Dimensional analysis of fatigue crack fields and crack growth by in situ synchrotron X-ray tomography International Journal Of Fatigue, 170 May 2023 DOI: 10.1016/j.ijfatigue.2023.107541
Micro-CT can take us back in time to the dawn of jaws May 2023
Science Highlight I12-JEEP: Joint Engineering, Environmental and Processing
Synchrotron X-ray studies of the structural and functional hierarchies in mineralised human dental enamel: a state-of-the-art review Dentistry Journal, 11 Apr 2023 DOI: 10.3390/dj11040098
Journal Paper B16-Test Beamline DIAD-Dual Imaging and Diffraction Beamline E01-JEM ARM 200CF E02-JEM ARM 300CF I08-Scanning X-ray Microscopy beamline (SXM) I12-JEEP: Joint Engineering, Environmental and Processing I13-1-Coherence I13-2-Diamond Manchester Imaging I14-Hard X-ray Nanoprobe open access
In situ correlative observation of humping-induced cracking in directed energy deposition of nickel-based superalloys Additive Manufacturing, 119 Apr 2023 DOI: 10.1016/j.addma.2023.103579
Structure and physical properties of Mg93−xZnxCa7 metallic glasses Materials, 16 Mar 2023 DOI: 10.3390/ma16062313
Application of a new method for accurate determination of α and β texture in Ti-6Al-4 V from synchrotron diffraction intensities Materials Characterization, Mar 2023 DOI: 10.1016/j.matchar.2023.112769
Synchrotron imaging derived relationship between process parameters and build quality for directed energy deposition additively manufactured IN718 Additive Manufacturing Letters, volume 861 Mar 2023 DOI: 10.1016/j.addlet.2023.100137
Functional fatigue during superelastic load cycling of Ti2448 (Ti-24Nb-4Zr-8Sn, wt%) Materialia, 214 Feb 2023 DOI: 10.1016/j.mtla.2023.101719
Structural changes in the silver-carbon composite anode interlayer of solid-state batteries Joule, 1 Feb 2023 DOI: 10.1016/j.joule.2023.02.001
Failure mechanisms in low-porosity carbonate rocks during the reactivation of deformation bands with various orientations Feb 2023 DOI: 10.5194/egusphere-egu23-9609
Structural features, dissolution performance and anthelmintic efficacy of multicomponent solid forms of fenbendazole with maleic and oxalic acids Crystengcomm, Feb 2023 DOI: 10.1039/D2CE01644C
Journal Paper I12-JEEP: Joint Engineering, Environmental and Processing
A well-preserved ‘placoderm’ (stem-group Gnathostomata) upper jaw from the Early Devonian of Mongolia clarifies jaw evolution Royal Society Open Science, 10 Feb 2023 DOI: 10.1098/rsos.221452
Synchrotron X-ray diffraction for early characterisation of sealed Mars2020 samples Feb 2023 DOI: 10.5194/egusphere-egu23-14721
Modification of structural, mechanical, corrosion and biocompatibility properties of Ti40Zr10Cu36Pd14 metallic glass by minor Ga and Sn additions Journal Of Alloys And Compounds, 43 Jan 2023 DOI: 10.1016/j.jallcom.2023.168776
Journal Paper I12-JEEP: Joint Engineering, Environmental and Processing
Multi-length-scale study on the heat treatment response to supersaturated nickel-based superalloys: Precipitation reactions and incipient recrystallisation Additive Manufacturing, 15 Jan 2023 DOI: 10.1016/j.addma.2023.103389
Nuclear quantum dynamics in Hexamethylenetetramine and its deuterated counterpart: a DFT-augmented neutron study Physica Scripta, Jan 2023 DOI: 10.1088/1402-4896/acb323
Effects of melt pool flow on porosity levels in arc welding Iop Conference Series: Materials Science And Engineering, 1274 Jan 2023 DOI: 10.1088/1757-899X/1274/1/012011
Revealing atomic structure evolution of an Al-1.5Fe alloy in the liquid state using X-ray total scattering and empirical potential structure refinement Jan 2023 DOI: 10.1088/1757-899X/1274/1/012007
- Nicole L. Church, Ayush Prasad, Christian E. P. Talbot, Oliver G. Reed, Nicholas G. Jones, "Development of a novel Ti-Nb-Au superelastic alloy with exceptionally low elastic modulus", Materials Research Letters, 12, 34 - 41 (2023), DOI: 10.1080/21663831.2023.2287072
- L. F. Adam, J. C. Bridges, C. C. Bedford, J. M. C. Holt, E. Rampe, M. Thorpe, K. Mason, R. C. Ewing, "Synchrotron x‐ray diffraction for sealed Mars Sample Return sample tubes", Meteoritics & Planetary Science, 2678 (2023), DOI: 10.1111/maps.14105
- Damien Freitas, Ian Butler, Stephen C. Elphick, James Gilgannon, Roberto E. Rizzo, Oliver Pluemper, John Wheeler, Christian M. Schlepütz, Federica Marone, Florian Fusseis, "Heitt Mjölnir: a heated miniature triaxial apparatus for 4D synchrotron microtomography", Journal Of Synchrotron Radiation, 31 (2023), DOI: 10.1107/S1600577523009876
- Jiadong Chen, Oxana V. Magdysyuk, Xiao Li, Philip J. Withers, Kun Yan, "Investigation of ductile damage in dual phase steel during tensile deformation by in situ X-ray computed tomography", Engineering Fracture Mechanics, 46 (2023), DOI: 10.1016/j.engfracmech.2023.109711
- Arthur Fordham, Zoran Milojevic, Emily Giles, Wenjia Du, Rhodri E. Owen, Stefan Michalik, Philip A. Chater, Prodip K. Das, Pierrot S. Attidekou, Simon M. Lambert, Phoebe K. Allan, Peter R. Slater, Paul A. Anderson, Rhodri Jervis, Paul R. Shearing, Dan J. I. Brett, "Correlative non-destructive techniques to investigate aging and orientation effects in automotive Li-ion pouch cells", Joule, 7, 2622 - 2652 (2023), DOI: 10.1016/j.joule.2023.10.011
- G. J. Wise, N. L. Church, C. E. P. Talbot, P. M. Mignanelli, M. C. Hardy, N. G. Jones, H. J. Stone, "Microstructural stability and evolution in a new polycrystalline Ni-base superalloy", Metallurgical And Materials Transactions A, 64 (2023), DOI: 10.1007/s11661-023-07211-9
- Daniil Kazantsev, Lucas Beveridge, Vigneshwar Shanmugasundar, Oxana Magdysyuk, "Conditional generative adversarial networks for stripe artefact removal in high-resolution X-ray tomography", Tomography Of Materials And Structures, 1 (2023), DOI: 10.1016/j.tmater.2023.100019
- Alisha Bhatt, Yuze Huang, Chu Lun Alex Leung, Gowtham Soundarapandiyan, Sebastian Marussi, Saurabh Shah, Robert Atwood, Michael E. Fitzpatrick, Manish K. Tiwari, Peter D. Lee, "In situ characterisation of surface roughness and its amplification during multilayer single-track laser powder bed fusion additive manufacturing", Additive Manufacturing, 59 (2023), DOI: 10.1016/j.addma.2023.103809
- N. L. Church, C. E. P. Talbot, L. D. Connor, S. Michalik, N. G. Jones, "The interdependence of the thermal and mechanical cycling behaviour in Ti2448 (Ti–24Nb–4Zr–8Sn, wt%)", Materials Science And Engineering: A, 8 (2023), DOI: 10.1016/j.msea.2023.145791
- M. A. M. Alshahrani, S. W. Ooi, G. Divitini, H. K. D. H. Bhadeshia, "Mitigating high temperature hydrogen attack with interphase precipitation", International Journal Of Hydrogen Energy, 44 (2023), DOI: 10.1016/j.ijhydene.2023.09.179
- [Conference Paper] Maria-Eleni Taxopoulou, Elli-Maria Charalampidou, Nicolas Beaudoin, Charles Aubourg, Alexis Cartwright-Taylor, Ian B. Butler, "Reactivation of natural deformation bands in upper crustal sedimentary rocks: insights from laboratory-induced deformation with 4D X-ray tomography" (2023)
- C. E. P. Talbot, N. L. Church, N. G. Jones, "Effect of prior processing on the decomposition of the β phase in Ti–Nb alloys during intermediate heat treatments", Scripta Materialia, 238 (2023), DOI: 10.1016/j.scriptamat.2023.115729
- Z. Ma, M. Bignon, F. Gao, S. Michalik, J. D. Robson, "In-situ investigation of dynamic precipitation in pre-aged Al-Zn-Mg-Cu alloy AA7075", Journal Of Alloys And Compounds, 47 (2023), DOI: 10.1016/j.jallcom.2023.172098
- [Conference Paper] D. Della Crociata, P.e.j. Rivera-Díaz-Del-Castillo, H. Eskandari Sabzi, R. Hague, M. Simonelli, "Phases evolution in additive manufactured TRIP custom 17-4PH alloy: opportunities for energy absorption applications" (2023)
- Fatih Uzun, Hector Basoalto, Konstantinos Liogas, Jingwei Chen, Igor P. Dolbnya, Zifan I. Wang, Alexander M. Korsunsky, "Voxel-based full-field eigenstrain reconstruction of residual stresses in additive manufacturing parts using height digital image correlation", Additive Manufacturing, 77 (2023), DOI: 10.1016/j.addma.2023.103822
- Fan Wu, Thomas Flint, Renan M. Kindermann, Matthew J. Roy, Lu Yang, Stuart Robertson, Zhaoxia Zhou, Michael Smith, Pratheek Shanthraj, Paul English, Robert Atwood, Wajira Mirihanage, "Evolution and formation of dissimilar metal interfaces in fusion welding", Acta Materialia, 257 (2023), DOI: 10.1016/j.actamat.2023.119232
- Sara E. Bakhtiari, Zilan Zhu, Oxana V. Magdysyuk, Steve Brocchini, Gareth R. Williams, "Amorphous solid dispersions of lidocaine and lidocaine HCl produced by ball milling with well-defined RAFT-synthesised methacrylic acid polymers", International Journal Of Pharmaceutics, 12 (2023), DOI: 10.1016/j.ijpharm.2023.123291
- Ching Kiat Yong, Elspeth M. Keating, Darren J. Hughes, Thomas Connolley, Geoff West, Chow Cher Wong, Gregory J Gibbons, "Assessment of residual strain in laser shock peened additive manufactured Inconel 718 using synchrotron x-ray diffraction", Materialia, 5 (2023), DOI: 10.1016/j.mtla.2023.101843
- [Conference Paper] Ranggi S. Ramadhan, Abdullah Al Mamun, James A. D. Ball, Eralp Demir, David M. Collins, Dylan Agius, Mahmoud Mostavafi, David Knowles, "Exploring 3D X-ray diffraction method to validate approaches in materials modelling" (2023), DOI: 10.1115/PVP2023-106248
- Yuying Pang, Simon Gaisford, Oxana V. Magdysyuk, Gareth R. Williams, "Polymorphic transitions in flufenamic acid-trehalose composites", International Journal Of Pharmaceutics: X, 64 (2023), DOI: 10.1016/j.ijpx.2023.100200
- Xianqiang Fan, Tristan G. Fleming, David T. Rees, Yuze Huang, Sebastian Marussi, Chu Lun Alex Leung, Robert C. Atwood, Andrew Kao, Peter D. Lee, "Thermoelectric magnetohydrodynamic control of melt pool flow during laser directed energy deposition additive manufacturing", Additive Manufacturing, 71 (2023), DOI: 10.1016/j.addma.2023.103587
- N. L. Church, C. E. P. Talbot, J. R. Miller, L. D. Connor, S. Michalik, N. G. Jones, "Evidence of dislocation dependent behaviour in superelastic Ti2448 (Ti-24Nb-4Zr-8Sn, wt%)", Acta Materialia, 57 (2023), DOI: 10.1016/j.actamat.2023.119066
- Hongyang Dong, Simon D. M. Jacques, Winfred Kockelmann, Stephen W. T. Price, Robert Emberson, Dorota Matras, Yaroslav I. Odarchenko, Vesna Middelkoop, Athanasios Giokaris, Olof Gutowski, Ann-Christin Dippel, Martin Von Zimmermann, Andrew M. Beale, Keith T. Butler, Antonios Vamvakeros, "A scalable neural network architecture for self-supervised tomographic image reconstruction", Digital Discovery, 2 (2023), DOI: 10.1039/D2DD00105E
- Gowtham Soundarapandiyan, Chu Lun Alex Leung, Carol Johnston, Bo Chen, Raja H. U. Khan, Phil Mcnutt, Alisha Bhatt, Robert C. Atwood, Peter D. Lee, Michael E. Fitzpatrick, "In situ monitoring the effects of Ti6Al4V powder oxidation during laser powder bed fusion additive manufacturing", International Journal Of Machine Tools And Manufacture, 139 (2023), DOI: 10.1016/j.ijmachtools.2023.104049
- Xianqiang Fan, Natalia Shevchenko, Catherine Tonry, Samuel J. Clark, Robert C. Atwood, Sven Eckert, Koulis Pericleous, Peter D. Lee, Andrew Kao, "Controlling solute channel formation using magnetic fields", Acta Materialia, 379 (2023), DOI: 10.1016/j.actamat.2023.119107
- Wanda Mamrilla, Zuzana Molčanová, Beáta Ballóková, Miroslav Džupon, Róbert Džunda, Dávid Csík, Stefan Michalik, Maksym Lisnichuk, Karel Saksl, "The Influence of manganese addition on the properties of biodegradable zinc-manganese-calcium alloys", Materials, 16 (2023), DOI: 10.3390/ma16134655
- [Conference Paper] Nicole Church, Christian Talbot, Leigh Connor, Stefan Michalik, Nicholas Jones, "In situ studies of α” evolution during cyclic testing of Ti-24Nb-4Zr-8Sn" (2023)
- [Conference Paper] Nicholas Jones, Nicole Church, Christian Talbot, Joe Bennett, Lewis Owen, Howard Stone, "The nature, evolution and effect of the omega phase in Ti-15Mo (wt.%)" (2023)
- [Conference Paper] N. L. Church, C. E. P. Talbot, J. R. Miller, L. D. Connor, S. Michalik, N. G. Jones, "The transformation behaviour of Ti-Nb based alloys following low temperature thermal treatments" (2023)
- [Conference Paper] Nicholas G. Jones, Nicole Church, "Understanding the transformation behaviour of metastable beta alloys" (2023)
- [Conference Paper] Christian Talbot, Nicole Church, Leigh Connor, Stefan Michalik, Nicholas Jones, "Understanding the role and effects of ω precipitation on the mechanical properties of metastable β-Ti alloys" (2023)
- A. Koko, S. Singh, S. Barhli, T. Connolley, N. T. Vo, T. Wigger, D. Liu, Y. Fu, J. Réthoré, J. Lechambre, J.-Y. Buffiere, T. J. Marrow, "3-Dimensional analysis of fatigue crack fields and crack growth by in situ synchrotron X-ray tomography", International Journal Of Fatigue, 170 (2023), DOI: 10.1016/j.ijfatigue.2023.107541
- [Science Highlight] Diamond Light Source, "Micro-CT can take us back in time to the dawn of jaws" (2023)
- Cyril Besnard, Ali Marie, Sisini Sasidharan, Robert A. Harper, Richard M. Shelton, Gabriel Landini, Alexander M. Korsunsky, "Synchrotron X-ray studies of the structural and functional hierarchies in mineralised human dental enamel: a state-of-the-art review", Dentistry Journal, 11 (2023), DOI: 10.3390/dj11040098
- Tristan G. Fleming, David Tien Rees, Sebastian Marussi, Thomas Connolley, Robert C. Atwood, Martyn A. Jones, James Fraser, Chu Lun Alex Leung, Peter D. Lee, "In situ correlative observation of humping-induced cracking in directed energy deposition of nickel-based superalloys", Additive Manufacturing, 119 (2023), DOI: 10.1016/j.addma.2023.103579
- Stefan Michalik, Zuzana Molčanová, Michaela Sulikova, Katarína Kušnírová, Pál Jóvári, Jacques Darpentigny, Karel Saksl, "Structure and physical properties of Mg93−xZnxCa7 metallic glasses", Materials, 16 (2023), DOI: 10.3390/ma16062313
- Christopher S. Daniel, Xiaohan Zeng, Stefan Michalik, Simon A. Hunt, Joao Quinta Da Fonseca, "Application of a new method for accurate determination of α and β texture in Ti-6Al-4 V from synchrotron diffraction intensities", Materials Characterization (2023), DOI: 10.1016/j.matchar.2023.112769
- S. V. Notley, Y. Chen, N. A. Thacker, P. D. Lee, G. Panoutsos, "Synchrotron imaging derived relationship between process parameters and build quality for directed energy deposition additively manufactured IN718", Additive Manufacturing Letters, volume 861 (2023), DOI: 10.1016/j.addlet.2023.100137
- N. L. Church, C. E. P. Talbot, L. D. Connor, S. Michalik, N. G. Jones, "Functional fatigue during superelastic load cycling of Ti2448 (Ti-24Nb-4Zr-8Sn, wt%)", Materialia, 214 (2023), DOI: 10.1016/j.mtla.2023.101719
- Dominic Spencer-Jolly, Varnika Agarwal, Christopher Doerrer, Bingkun Hu, Shengming Zhang, Dominic L. R. Melvin, Hui Gao, Xiangwen Gao, Paul Adamson, Oxana Magdysyuk, Patrick S. Grant, Robert A. House, Peter G. Bruce, "Structural changes in the silver-carbon composite anode interlayer of solid-state batteries", Joule, 1 (2023), DOI: 10.1016/j.joule.2023.02.001
- [Conference Paper] Elli-Maria Charalampidou, Maria-Eleni Taxopoulou, Nicolas Beaudoin, Charles Aubourg, Alexis Cartwright-Taylor, Ian Butler, Robert Atwood, Stefan Michalik, "Failure mechanisms in low-porosity carbonate rocks during the reactivation of deformation bands with various orientations" (2023), DOI: 10.5194/egusphere-egu23-9609
- Artem Olegovich Surov, Nikita Vasilev, Oxana V. Magdysyuk, German L. Perlovich, Anastasiya Varlamova, Ivan Arkhipov, Irina Odoevskaya, "Structural features, dissolution performance and anthelmintic efficacy of multicomponent solid forms of fenbendazole with maleic and oxalic acids", Crystengcomm (2023), DOI: 10.1039/D2CE01644C
- Martin D. Brazeau, Haobo Yuan, Sam Giles, Anna L. Jerve, Enkhtaivan Zorig, Ya. Ariunchimeg, Robert S. Sansom, Robert C. Atwood, "A well-preserved ‘placoderm’ (stem-group Gnathostomata) upper jaw from the Early Devonian of Mongolia clarifies jaw evolution", Royal Society Open Science, 10 (2023), DOI: 10.1098/rsos.221452
- [Conference Paper] Lukas Adam, John Bridges, Donald Bowden, John Holt, Candice Bedford, "Synchrotron X-ray diffraction for early characterisation of sealed Mars2020 samples" (2023), DOI: 10.5194/egusphere-egu23-14721
- Andrea Lachova, Mihai Stoica, Stefan Michalik, Petre F. Gostin, Masako Fujioka-Kobayashi, Benoît Schaller, Jörg F. Löffler, Pavol Sovák, "Modification of structural, mechanical, corrosion and biocompatibility properties of Ti40Zr10Cu36Pd14 metallic glass by minor Ga and Sn additions", Journal Of Alloys And Compounds, 43 (2023), DOI: 10.1016/j.jallcom.2023.168776
- Yuanbo T. Tang, Chinnapat Panwisawas, Benjamin M. Jenkins, Junliang Liu, Zhao Shen, Enrico Salvati, Yilun Gong, Joseph N. Ghoussoub, Stefan Michalik, Bryan Roebuck, Paul A. J. Bagot, Sergio Lozano-Perez, Chris R. M. Grovenor, Michael P. Moody, Alexander M. Korsunsky, David M. Collins, Roger C. Reed, "Multi-length-scale study on the heat treatment response to supersaturated nickel-based superalloys: Precipitation reactions and incipient recrystallisation", Additive Manufacturing, 15 (2023), DOI: 10.1016/j.addma.2023.103389
- Matthew Krzystyniak, Matthias J. Gutmann, Keith Refson, Giovanni Romanelli, Svemir Rudic, Silvia Chiara Capelli, Dominic Fortes, Oxana Magdysyuk, José Ignacio Márquez Damián, Guillermo Maciel-Pereira, "Nuclear quantum dynamics in Hexamethylenetetramine and its deuterated counterpart: a DFT-augmented neutron study", Physica Scripta (2023), DOI: 10.1088/1402-4896/acb323
- [Conference Paper] F. Wu, K. V. Falch, M. Drakopoulos, W. U. Mirihanage, "Effects of melt pool flow on porosity levels in arc welding", Iop Conference Series: Materials Science And Engineering, 1274 (2023), DOI: 10.1088/1757-899X/1274/1/012011
- [Conference Paper] S. Huang, L. Qin, J. Zhao, K. Xiang, S. Luo, St. Michalik, J. Mi, "Revealing atomic structure evolution of an Al-1.5Fe alloy in the liquid state using X-ray total scattering and empirical potential structure refinement" (2023), DOI: 10.1088/1757-899X/1274/1/012007
Diamond Light Source is the UK's national synchrotron science facility, located at the Harwell Science and Innovation Campus in Oxfordshire.
Diamond Light Source Ltd
Diamond House
Harwell Science & Innovation Campus
Didcot
Oxfordshire
OX11 0DE
Copyright © Diamond Light Source. Diamond Light Source® and the Diamond logo are registered trademarks of Diamond Light Source Ltd
Registered in England and Wales at Diamond House, Harwell Science and Innovation Campus, Didcot, Oxfordshire, OX11 0DE, United Kingdom. Company number: 4375679. VAT number: 287 461 957. Economic Operators Registration and Identification (EORI) number: GB287461957003.