Instruments by Science Group
Macromolecular
Soft Condensed 
Imaging and
Biological
Magnetic
Structures and
Crystallography 
Spectroscopy I12 Contact
Science Group Leader
Julia Parker
Email: [email protected]
Tel: +44 (0)1235 778924
I12 JEEP: Joint Engineering, Environment and Processing
Status: Operational
Beamsize: From 50 micrometer x 50 micrometer to 50 mm x 15 mm (EH1) or 100 mm x 30 mm (EH2)
Energy: 53 – 150 keV
Energy: 53 – 150 keV
Publications
These papers are all based at least in part on data gathered on beamline I12. If you have published a paper based on data from I12 which doesn't appear here, please send a reference (ideally including a DOI) to us.
39 items found for 2019 [total: 575]
In situ characterization of work hardening and springback in grade 2 α-titanium under tensile load Acta Materialia, 181 Dec 2019 DOI: 10.1016/j.actamat.2019.09.039
Crack tip stress field analysis of crack surface contact and opening during in situ wedge loading of human enamel Key Engineering Materials, 827 Dec 2019 DOI: 10.4028/www.scientific.net/KEM.827.85
Journal Paper I12-JEEP: Joint Engineering, Environmental and Processing
Measurement of strain evolution in overloaded roller bearings using energy dispersive X-ray diffraction Tribology International, 140 Dec 2019 DOI: 10.1016/j.triboint.2019.105893
Characterization of ultrasonic bubble clouds in a liquid metal by synchrotron X-ray high speed imaging and statistical analysis Materials, 13 Dec 2019 DOI: 10.3390/ma13010044
A simultaneous X-ray diffraction–differential scanning calorimetry study into the phase transitions of mefenamic acid Journal Of Applied Crystallography, 52 Dec 2019 DOI: 10.1107/S1600576719012500
Journal Paper I12-JEEP: Joint Engineering, Environmental and Processing
Strobo-strain: Stroboscopic neutron and X-ray strain measurements in dynamically loaded engineering components Dec 2019
Thesis I12-JEEP: Joint Engineering, Environmental and Processing
The effect of anisotropic microstructure on the crack growth and fatigue overload behaviour of ultrafine-grained nickel Acta Materialia, Nov 2019 DOI: 10.1016/j.actamat.2019.11.024
Journal Paper I12-JEEP: Joint Engineering, Environmental and Processing
Effect of plasticity on creep deformation in type 316H stainless steel Nov 2019 DOI: 10.1115/PVP2019-93587
Conference Paper I12-JEEP: Joint Engineering, Environmental and Processing
Analysis by synchrotron X-ray scattering of the kinetics of formation of an Fe-based metal-organic framework with high CO2 adsorption Apl Materials, 7 Nov 2019 DOI: 10.1063/1.5121644
Journal Paper B22-Multimode InfraRed imaging And Microspectroscopy I11-High Resolution Powder Diffraction I12-JEEP: Joint Engineering, Environmental and Processing open access
Magma fragmentation in highly explosive basaltic eruptions induced by rapid crystallization Nature Geoscience, 397 Oct 2019 DOI: 10.1038/s41561-019-0468-6
Journal Paper I12-JEEP: Joint Engineering, Environmental and Processing
Transition from high-entropy to Cu-based (TiZrNbNi)1−xCux metallic glasses Journal Of Applied Physics, 126 Oct 2019 DOI: 10.1063/1.5119373
Journal Paper I12-JEEP: Joint Engineering, Environmental and Processing
Direct synthesis of a solid calcium-silicate-hydrate (C-S-H) Construction And Building Materials, 223 Oct 2019 DOI: 10.1016/j.conbuildmat.2019.06.024
Journal Paper I12-JEEP: Joint Engineering, Environmental and Processing I15-1-X-ray Pair Distribution Function (XPDF) open access
Preprocessing techniques for removing artifacts in synchrotron-based tomographic images Sept 2019 DOI: 10.1117/12.2530324
Bio-mimic Ti-Ta composite with hierarchical “brick-and-mortar” microstructure Materialia, Sept 2019 DOI: 10.1016/j.mtla.2019.100463
Journal Paper I12-JEEP: Joint Engineering, Environmental and Processing
Monitoring the degradation of nuclear waste packages induced by interior metallic corrosion using synchrotron X-ray tomography Construction And Building Materials, 215 Aug 2019 DOI: 10.1016/j.conbuildmat.2019.04.178
Journal Paper I12-JEEP: Joint Engineering, Environmental and Processing
New pharmaceutical cocrystal forms of flurbiprofen: structural, physicochemical and thermodynamic characterization Crystal Growth & Design, Aug 2019 DOI: 10.1021/acs.cgd.9b00781
Journal Paper I12-JEEP: Joint Engineering, Environmental and Processing
Influence of microstructure on the corrosion of archaeological iron observed using 3D synchrotron micro-tomography Corrosion Science, Aug 2019 DOI: 10.1016/j.corsci.2019.108132
Journal Paper B18-Core EXAFS I11-High Resolution Powder Diffraction I12-JEEP: Joint Engineering, Environmental and Processing
Effects of residual stresses and localised strain-hardening on the fracture of ductile materials Procedia Structural Integrity, 17 Aug 2019 DOI: 10.1016/j.prostr.2019.08.124
Combined deformation and solidification-driven porosity formation in aluminum alloys Metallurgical And Materials Transactions A, 49 Aug 2019 DOI: 10.1007/s11661-019-05378-8
Journal Paper I12-JEEP: Joint Engineering, Environmental and Processing
In situ deformation studies of hcp metal alloys with neutron diffraction, X-ray diffraction, and high resolution digital image correlation Aug 2019 DOI: 10.5075/epfl-thesis-7262
When do anisotropic magnetic susceptibilities lead to large nmr shifts? Exploring particle shape effects in the battery electrode material LiFePo4 Journal Of The American Chemical Society, Jul 2019 DOI: 10.1021/jacs.9b04674
Journal Paper I12-JEEP: Joint Engineering, Environmental and Processing
Image-based fracture mechanics with digital image correlation and digital volume correlation Jul 2019
Thesis I12-JEEP: Joint Engineering, Environmental and Processing
Fatigue crack closure: A myth or a misconception? Fatigue & Fracture Of Engineering Materials & Structures, 13 Jul 2019 DOI: 10.1111/ffe.13112
Journal Paper I12-JEEP: Joint Engineering, Environmental and Processing
High-energy, high-resolution, fly-scan X-ray phase tomography Scientific Reports, 9 June 2019 DOI: 10.1038/s41598-019-45561-w
Physics of animal health: on the mechano-biology of hoof growth and form Journal Of The Royal Society Interface, 16 June 2019 DOI: 10.1098/rsif.2019.0214
Validating 3D two-parameter fracture mechanics models for structural integrity assessments Theoretical And Applied Fracture Mechanics, June 2019 DOI: 10.1016/j.tafmec.2019.102281
Journal Paper I12-JEEP: Joint Engineering, Environmental and Processing
A kinetic and mechanistic study into the transformation of calcium sulfate hemihydrate to dihydrate Journal Of Synchrotron Radiation, May 2019 DOI: 10.1107/S1600577519001929
The effects of swift Xe ion bombardment on the amorphous structure of a VITROPERM type alloy Journal Of Alloys And Compounds, 795 May 2019 DOI: 10.1016/j.jallcom.2019.04.328
Journal Paper I12-JEEP: Joint Engineering, Environmental and Processing
Application of neutron imaging to detect and quantify fatigue cracking International Journal Of Mechanical Sciences, May 2019 DOI: 10.1016/j.ijmecsci.2019.05.037
Fundamental studies of ultrasonic melt processing Ultrasonics Sonochemistry, 52 Apr 2019 DOI: 10.1016/j.ultsonch.2018.12.028
Olanzapine form IV: discovery of a new polymorphic form enabled by computed crystal energy landscapes Crystal Growth & Design, Mar 2019 DOI: 10.1021/acs.cgd.8b01881
Journal Paper I12-JEEP: Joint Engineering, Environmental and Processing
TbO + in a calcium apatite matrix featuring a triple trigger-type relaxation of magnetization Dalton Transactions, 365 Mar 2019 DOI: 10.1039/C9DT01120J
Journal Paper I12-JEEP: Joint Engineering, Environmental and Processing
Full-field characterisation of the deformation near fatigue crack tips using advanced imaging and diffraction techniques Mar 2019
Thesis I12-JEEP: Joint Engineering, Environmental and Processing open access
Formation mechanism of abnormally large grains in a polycrystalline nickel-based superalloy during heat treatment processing Acta Materialia, Feb 2019 DOI: 10.1016/j.actamat.2019.02.012
Journal Paper I12-JEEP: Joint Engineering, Environmental and Processing
Understanding the highly dynamic phenomena in ultrasonic melt processing by ultrafast synchrotron X-ray imaging Feb 2019 DOI: 10.1007/978-3-030-05864-7_194
Book Chapter I12-JEEP: Joint Engineering, Environmental and Processing
Residual lattice strain and phase distribution in Ti-6Al-4V produced by electron beam melting Materials, 12 Feb 2019 DOI: 10.3390/ma12040667
Effect of mixed salts on atmospheric corrosion of 304 stainless steel Journal Of The Electrochemical Society, 166 Jan 2019 DOI: 10.1149/2.0021911jes
The effect of relative humidity change on atmospheric pitting corrosion of stainless steel 304L Corrosion Science, Jan 2019 DOI: 10.1016/j.corsci.2019.01.033
Journal Paper I12-JEEP: Joint Engineering, Environmental and Processing
Crystalline frameworks self-assembled from amphiphilic DNA nanostructures Jan 2019 DOI: 10.17863/CAM.36954
- K. Sofinowski, M. Šmíd, S. Van Petegem, S. Rahimi, T. Connolley, Helena Van Swygenhoven, "In situ characterization of work hardening and springback in grade 2 α-titanium under tensile load", Acta Materialia, 181, 87 - 98 (2019), DOI: 10.1016/j.actamat.2019.09.039
- Enrico Salvati, Cyril Besnard, Robert A. Harper, Thomas Moxham, Richard Shelton, Gabriel Landini, Alexander M. Korsunsky, "Crack tip stress field analysis of crack surface contact and opening during in situ wedge loading of human enamel", Key Engineering Materials, 827, 85 - 91 (2019), DOI: 10.4028/www.scientific.net/KEM.827.85
- A. Reid, C. Simpson, I. Martinez, S. Kabra, T. Connolley, O. Magdysyuk, C. Charlesworth, M. Marshall, M. Mostafavi, "Measurement of strain evolution in overloaded roller bearings using energy dispersive X-ray diffraction", Tribology International, 140 (2019), DOI: 10.1016/j.triboint.2019.105893
- Chuangnan Wang, Thomas Connolley, Iakovos Tzanakis, Dmitry Eskin, Jiawei Mi, "Characterization of ultrasonic bubble clouds in a liquid metal by synchrotron X-ray high speed imaging and statistical analysis", Materials, 13, 44 (2019), DOI: 10.3390/ma13010044
- Yuying Pang, Asma Buanz, Richard Telford, Oxana V. Magdysyuk, Simon Gaisford, Gareth Williams, "A simultaneous X-ray diffraction–differential scanning calorimetry study into the phase transitions of mefenamic acid", Journal Of Applied Crystallography, 52 (2019), DOI: 10.1107/S1600576719012500
- [Thesis] Anthony Reid, "Strobo-strain: Stroboscopic neutron and X-ray strain measurements in dynamically loaded engineering components" (2019)
- W. Zhang, C. A. Simpson, T. Leitner, X. Zhang, R. Pippan, P. J. Withers, "The effect of anisotropic microstructure on the crack growth and fatigue overload behaviour of ultrafine-grained nickel", Acta Materialia (2019), DOI: 10.1016/j.actamat.2019.11.024
- [Conference Paper] Abdullah Al Mamun, Chris Simpson, Tomiwa Erinosho, Dylan Agius, Christina Reinhard, Mahmoud Mostafavi, David Knowles, "Effect of plasticity on creep deformation in type 316H stainless steel" (2019), DOI: 10.1115/PVP2019-93587
- Harry G. W. Godfrey, Lydia Briggs, Xue Han, William J. F. Trenholme, Christopher Morris, Mathew Savage, Louis Kimberley, Oxana Magdysyuk, Michael Drakopoulos, Claire A. Murray, Chiu C. Tang, Mark D. Frogley, Gianfelice Cinque, Sihai Yang, Martin Schroeder, "Analysis by synchrotron X-ray scattering of the kinetics of formation of an Fe-based metal-organic framework with high CO2 adsorption", Apl Materials, 7 (2019), DOI: 10.1063/1.5121644
- Fabio Arzilli, Giuseppe La Spina, Mike R. Burton, Margherita Polacci, Nolwenn Le Gall, Margaret E. Hartley, Danilo Di Genova, Biao Cai, Nghia T. Vo, Emily C. Bamber, Sara Nonni, Robert Atwood, Edward W. Llewellin, Richard A. Brooker, Heidy M. Mader, Peter D. Lee, "Magma fragmentation in highly explosive basaltic eruptions induced by rapid crystallization", Nature Geoscience, 397 (2019), DOI: 10.1038/s41561-019-0468-6
- Ramir Ristić, Ignacio A. Figueroa, Andrea Lachova, Stefan Michalik, Vesna Mikšić Trontl, Petar Pervan, Krešo Zadro, Damir Pajić, Emil Babić, "Transition from high-entropy to Cu-based (TiZrNbNi)1−xCux metallic glasses", Journal Of Applied Physics, 126 (2019), DOI: 10.1063/1.5119373
- Riccardo Maddalena, Kefei Li, Philip A. Chater, Stefan Michalik, Andrea Hamilton, "Direct synthesis of a solid calcium-silicate-hydrate (C-S-H)", Construction And Building Materials, 223, 554 - 565 (2019), DOI: 10.1016/j.conbuildmat.2019.06.024
- [Conference Paper] Nghia Vo, Robert C. Atwood, Michael Drakopoulos, "Preprocessing techniques for removing artifacts in synchrotron-based tomographic images" (2019), DOI: 10.1117/12.2530324
- Shenghang Xu, Meng Du, Jia Li, Kun Yan, Biao Cai, Quanfeng He, Qihong Fang, Oxana Magdysyuk, Bin Liu, Yong Yang, Yong Liu, "Bio-mimic Ti-Ta composite with hierarchical “brick-and-mortar” microstructure", Materialia (2019), DOI: 10.1016/j.mtla.2019.100463
- C. Paraskevoulakos, C. A. Stitt, K. R. Hallam, A. Banos, M. Leal Olloqui, C. P. Jones, G. Griffiths, A. M. Adamska, J. Jowsey, T. B. Scott, "Monitoring the degradation of nuclear waste packages induced by interior metallic corrosion using synchrotron X-ray tomography", Construction And Building Materials, 215, 90 - 103 (2019), DOI: 10.1016/j.conbuildmat.2019.04.178
- Artem O. Surov, Alex N. Manin, Alexander P. Voronin, Denis Boycov, Oxana V. Magdysyuk, German L. Perlovich, "New pharmaceutical cocrystal forms of flurbiprofen: structural, physicochemical and thermodynamic characterization", Crystal Growth & Design (2019), DOI: 10.1021/acs.cgd.9b00781
- H. J. Simon, G. Cibin, C. Reinhard, Y. Liu, E. Schofield, I. C. Freestone, "Influence of microstructure on the corrosion of archaeological iron observed using 3D synchrotron micro-tomography", Corrosion Science (2019), DOI: 10.1016/j.corsci.2019.108132
- [Conference Paper] H. E. Coules, G. C. M. Horne, "Effects of residual stresses and localised strain-hardening on the fracture of ductile materials", Procedia Structural Integrity, 17, 934 - 941 (2019), DOI: 10.1016/j.prostr.2019.08.124
- S. Bhagavath, B. Cai, R. Atwood, M. Li, B. Ghaffari, P. D. Lee, S. Karagadde, "Combined deformation and solidification-driven porosity formation in aluminum alloys", Metallurgical And Materials Transactions A, 49 (2019), DOI: 10.1007/s11661-019-05378-8
- [Thesis] K. Sofinowski, "In situ deformation studies of hcp metal alloys with neutron diffraction, X-ray diffraction, and high resolution digital image correlation" (2019), DOI: 10.5075/epfl-thesis-7262
- Roberta Pigliapochi, Liam O'Brien, Andrew J. Pell, Michael W. Gaultois, Yuri Janssen, Peter Khalifah, Clare P. Grey, "When do anisotropic magnetic susceptibilities lead to large nmr shifts? Exploring particle shape effects in the battery electrode material LiFePo4", Journal Of The American Chemical Society (2019), DOI: 10.1021/jacs.9b04674
- [Thesis] Ahmet Cinar, "Image-based fracture mechanics with digital image correlation and digital volume correlation" (2019)
- Jie Tong, Shaher Alshammrei, Bing Lin, Tim Wigger, Thomas Marrow, "Fatigue crack closure: A myth or a misconception?", Fatigue & Fracture Of Engineering Materials & Structures, 13 (2019), DOI: 10.1111/ffe.13112
- Hongchang Wang, Robert C. Atwood, Matthew James Pankhurst, Yogesh Kashyap, Biao Cai, Tunhe Zhou, Peter David Lee, Michael Drakopoulos, Kawal Sawhney, "High-energy, high-resolution, fly-scan X-ray phase tomography", Scientific Reports, 9, 8913 (2019), DOI: 10.1038/s41598-019-45561-w
- Ramzi Al-Agele, Emily Paul, Sophie Taylor, Charlotte Watson, Craig Sturrock, Michael Drakopoulos, Robert C. Atwood, Catrin S. Rutland, Nicola Menzies-Gow, Edd Knowles, Jonathan Elliott, Patricia Harris, Cyril Rauch, "Physics of animal health: on the mechano-biology of hoof growth and form", Journal Of The Royal Society Interface, 16 (2019), DOI: 10.1098/rsif.2019.0214
- C. A. Simpson, S. Tonge, T. Connolley, C. Reinhard, T. J. Marrow, M. Mostafavi, "Validating 3D two-parameter fracture mechanics models for structural integrity assessments", Theoretical And Applied Fracture Mechanics, 102281 (2019), DOI: 10.1016/j.tafmec.2019.102281
- Sebastian Gurgul, Gabriel Seng, Gareth Williams, "A kinetic and mechanistic study into the transformation of calcium sulfate hemihydrate to dihydrate", Journal Of Synchrotron Radiation (2019), DOI: 10.1107/S1600577519001929
- Š. Michalik, M. Cesnek, M. Pavlovič, M. Miglierini, "The effects of swift Xe ion bombardment on the amorphous structure of a VITROPERM type alloy", Journal Of Alloys And Compounds, 795, 69-78 (2019), DOI: 10.1016/j.jallcom.2019.04.328
- A. Reid, M. Marshall, S. Kabra, T. Minniti, W. Kockelmann, T. Connolley, A. James, T. J. Marrow, M. Mostafavi, "Application of neutron imaging to detect and quantify fatigue cracking", International Journal Of Mechanical Sciences (2019), DOI: 10.1016/j.ijmecsci.2019.05.037
- D. G. Eskin, I. Tzanakis, F. Wang, G. S. B. Lebon, T. Subroto, K. Pericleous, J. Mi, "Fundamental studies of ultrasonic melt processing", Ultrasonics Sonochemistry, 52, 455-467 (2019), DOI: 10.1016/j.ultsonch.2018.12.028
- Sean Askin, Jeremy K. Cockcroft, Louise S. Price, Andrea Goncalves, Min Zhao, Derek A. Tocher, Gareth R. Williams, Simon Gaisford, Duncan Q. M. Craig, "Olanzapine form IV: discovery of a new polymorphic form enabled by computed crystal energy landscapes", Crystal Growth & Design (2019), DOI: 10.1021/acs.cgd.8b01881
- Pavel E. Kazin, Mikhail A. Zykin, Oxana V. Magdysyuk, Valentina V. Utochnikova, Evgeny A. Gorbachev, Reinhard K. Kremer, Walter Schnelle, Claudia Felser, Martin Jansen, "TbO + in a calcium apatite matrix featuring a triple trigger-type relaxation of magnetization", Dalton Transactions, 365 (2019), DOI: 10.1039/C9DT01120J
- [Thesis] T. Wigger, "Full-field characterisation of the deformation near fatigue crack tips using advanced imaging and diffraction techniques" (2019)
- Xin Wang, Zaiwang Huang, Biao Cai, Ning Zhou, Oxana Magdysyuk, Yanfei Gao, Shesh Srivatsa, Liming Tan, Liang Jiang, "Formation mechanism of abnormally large grains in a polycrystalline nickel-based superalloy during heat treatment processing", Acta Materialia (2019), DOI: 10.1016/j.actamat.2019.02.012
- [Book Chapter] Jiawei Mi, Dmitry Eskin, Thomas Connolley, Kamel Fezzaa, "Understanding the highly dynamic phenomena in ultrasonic melt processing by ultrafast synchrotron X-ray imaging" (2019), DOI: 10.1007/978-3-030-05864-7_194
- Tuerdi Maimaitiyili, Robin Woracek, Magnus Neikter, Mirko Boin, Robert Wimpory, Robert Pederson, Markus Strobl, Michael Drakopoulos, Norbert Schäfer, Christina Bjerkén, "Residual lattice strain and phase distribution in Ti-6Al-4V produced by electron beam melting", Materials, 12 (2019), DOI: 10.3390/ma12040667
- Liya Guo, Na Mi, Haval Mohammed-Ali, Majid Ghahari, Andrew Du Plessis, Angus Cook, Steven Street, Christina Reinhard, Robert C. Atwood, Trevor Rayment, Alison J. Davenport, "Effect of mixed salts on atmospheric corrosion of 304 stainless steel", Journal Of The Electrochemical Society, 166, C3010 - C3014 (2019), DOI: 10.1149/2.0021911jes
- Liya Guo, Steven Street, Haval B. Mohammed-Ali, Majid Ghahari, Na Mi, Sarah Glanvill, Andrew Du Plessis, Christina Reinhard, Trevor Rayment, Alison Davenport, "The effect of relative humidity change on atmospheric pitting corrosion of stainless steel 304L", Corrosion Science (2019), DOI: 10.1016/j.corsci.2019.01.033
- [Thesis] Ryan Brady, "Crystalline frameworks self-assembled from amphiphilic DNA nanostructures" (2019), DOI: 10.17863/CAM.36954
Diamond Light Source is the UK's national synchrotron science facility, located at the Harwell Science and Innovation Campus in Oxfordshire.
Diamond Light Source Ltd
Diamond House
Harwell Science & Innovation Campus
Didcot
Oxfordshire
OX11 0DE
Copyright © Diamond Light Source. Diamond Light Source® and the Diamond logo are registered trademarks of Diamond Light Source Ltd
Registered in England and Wales at Diamond House, Harwell Science and Innovation Campus, Didcot, Oxfordshire, OX11 0DE, United Kingdom. Company number: 4375679. VAT number: 287 461 957. Economic Operators Registration and Identification (EORI) number: GB287461957003.