Users from European organisations continue to be welcome to submit proposals to Diamond. The same funding policy and procedure for expenses remains in place for any visit to Diamond as was in place before Brexit.
Ask your Local Contact
User Office: (08.30 - 16.30) - FedID & Passwords Only
Ext. 8571 / 01235 778571
IT support queries:
Urgent queries: Ext. 8271
A Beamline Visitor Instrumentation Network will be made available to connect users' equipment that needs access to the beamline network. e.g. Specialist sample environments.
Process Variables (PVs) published by the beamline are visible on this network. Users must give at least 2 weeks advance notice if they require the use of this network. For more information regarding experimental equipment, Please consult your Beamline contact.
These devices must not be connected to any Diamond Network other than the Visitor Network either wirelessly (SSID - "DLS-VIS") or wired connection (Black CAT6 cables only).
It is recommended that only hard-disk drives with their own power supply are used in conjunction with the Beamline DataDispensers as it has been found that hard-disk drives that draw power from the data bus can be unreliable in heavy use.
You can use either USB-2 or USB-3 connections. (Newer DataDispensers do not have eSATA interfaces). USB-3 is faster so long as these 3 requirements are all satisfied:
Diamond Light Source is the UK's national synchrotron science facility, located at the Harwell Science and Innovation Campus in Oxfordshire.
Copyright © 2022 Diamond Light Source
Diamond Light Source Ltd
Harwell Science & Innovation Campus
Diamond Light Source® and the Diamond logo are registered trademarks of Diamond Light Source Ltd
Registered in England and Wales at Diamond House, Harwell Science and Innovation Campus, Didcot, Oxfordshire, OX11 0DE, United Kingdom. Company number: 4375679. VAT number: 287 461 957. Economic Operators Registration and Identification (EORI) number: GB287461957003.