This lab is designed for chemical sample preparation. Users wanting to carry out chemical or material sample preparation are encouraged to use this lab over Lab 11 which is designed for biological sample preparation.
We aim to provide basic chemicals for a well-found laboratory. We have provided a list of the chemicals usually available in the lab; please contact beamline staff if you need something that's not on the list and to confirm we have enough of what you will need. We also provide the following:
All samples and buffers must be labelled with the substance name, date and your name. Please dispose of any unused samples or buffer solution at the end of your experiment via the approved waste stream. Samples or buffers are not to be left in the lab after your beamtime unless pre-agreement has been sought from your Local Contact. Any samples left without agreement will be disposed of.
Please contact the Lab Technician or Local Contact if you have any questions during your lab use.
The chemistry sample preparation lab is stocked with basic consumables that would be necessary for most experiments, including:
If you run out of something, or can't find what you need, please contact the Lab Technician or your Local Contact.
If you want to use any of these during an experiment please discuss with your I22 local contact
In addition to bench space and standard glassware, the lab is equipped with the following:
Larger apparatus will have operating instructions attached. If you have any questions or can't find the instructions, please ask the Lab Technician or your Local Contact.
Diamond Light Source is the UK's national synchrotron science facility, located at the Harwell Science and Innovation Campus in Oxfordshire.
Copyright © 2020 Diamond Light Source
Diamond Light Source Ltd
Harwell Science & Innovation Campus
Diamond Light Source® and the Diamond logo are registered trademarks of Diamond Light Source Ltd