Megahertz serial crystallography at the European XFEL

Megahertz serial crystallography. Pulses from the European XFEL were focused on the interaction region using a set of Beryllium lenses. Protein crystals in crystallization solution were introduced into the focused XFEL beam using a liquid jet of 1.8 µm diameter moving at speeds between 50 m/s and 100 m/s. Diffraction from the sample was measured using an AGIPD, which is capable of measuring up to 3520 pulses per second at megahertz frame rates. In-situ jet imaging (inset) showed that the liquid column does explode under the X-ray illumination conditions of this experiment using a jet with a speed of 100 m/s, but that the liquid jet recovered in less than 1 μs to deliver fresh sample in time for arrival of the next X-ray pulse. Images and movies of jets at different speeds are included in the supplementary material

Nature Communications volume 9, Article number: 4025 (2018)

The European XFEL produces bursts of X-ray pulses at a megahertz repetition rate within a train, repeating at 10 Hz frequency. At the current intra-bunch repetition rate of 1.1 MHz the pulse spacing is less than 1 μs, nearly four orders of magnitude shorter than previously available. The decreased time between X-ray pulses delivers more pulses per second while maintaining the same X-ray peak power, but simultaneously poses several challenges for SFX. 

The first experiment at the European XFEL was also the first ever to collect SFX data at over 1 MHz, a rate that would be equivalent to 1.1 million pulses if the pulse rate was continuous. Typically, samples are injected into the interaction region as liquid jets; how fast must the jet be to feed this new source? The X-ray beam causes a shockwave to travel up the liquid jet; does this damage the protein crystals on their way to the interaction region before SFX data can be measured? When you’re conducting an experiment with a microcrystal ‘slurry’ and a pulsed X-ray beam just 10-15 microns in size, there are obvious challenges in making sure they coincide in both time and space.

The team showed with direct imaging of the liquid jet using a stroboscopic laser that the XFEL pulse initially vaporises the jet, but the liquid column recovers in time for the next X-ray pulse for jets with a diameter of less than 2 μm and speeds between 50 and 100 m/s, while jets with a speed of 25 m/s do not recover in time.

The researchers were able to produce two complete data sets, one from the well-known model system lysozyme and the other from a previously unknown complex of a β-lactamase from K. pneumoniae. This enzyme belongs to the extended spectrum β-lactamases (ESBLs) that play an important role in emerging multi-antibiotic resistance mechanisms. These result open up megahertz SFX as a tool for reliable structure determination, substrate screening and the efficient measurement of the evolution and dynamics of molecular structures using megahertz repetition rate pulses.

The European XFEL has already performed experiments at 600 pulses per second at 1.1 MHz pulse rates. The instrument has been tested using pulse trains enabling 1760 pulses per second and 3520 pulses per second. It is planned to be available for users in 2019. When the number of pulses in the pulse train is increased to match the maximum AGIPD detector frame rate of 3520 frames per second, the β-lactamase measurements presented here could be completed in under a minute assuming a high crystal hit ratio.

The planned LCLS-II-HE facility promises up to 10⁶ equally-spaced pulses per second, increasing the rate of structure determination even further and enhancing the opportunities for rapid screening for drug targets using on-the-fly substrate mixing. Indeed, rapid data acquisition has the potential for generalising time-resolved movies of macromolecules catalysing their native reaction(s) at physiological temperatures.

Images of interaction of the EuXFEL liquid jet for the first 5 pulses in a train. Jets in the range of 50–100 m/s recover in time for the next pulse (first three rows), whereas slower jets of the type commonly used at LCLS do not recover in time for the next XFEL pulse at MHz repetition rates (bottom row). The bottom line provides linkage back to the results presented in presented in Chapman, et al. Nature 470, 73–77 (2011). Red line shows the intersection point with X-ray pulses. Images obtained by synchronised laser back illumination. Movies with finer time steps are included as supplementary material

Nature Communications volume 9, Article number: 4025 (2018)

However, unlike at a synchrotron, one SFX experiment uses the whole XFEL facility. Consequently, beamtime is both expensive and hard to get (with beamtime granted after rigorous international peer-review). It’s vitally important for users to maximise the data they get from their visit, and yet few users have experience conducting XFEL experiments.

To find out more about the XFEL-Hub, or to discuss potential applications, please contact Principal Scientist Allen Orville: [email protected]