________________________________________
Industrial Liaison Group:
Tel: +44 (0) 1235 778797
E-mail: industry@diamond.ac.uk
____________________________________
As the demand for high performance materials increases, so does the importance of surface engineering. Many of the problems associated with modern materials can only be solved by better understanding the physical and chemical interactions that occur at the surface or at the interfaces of a material’s layers. The surface chemistry will influence such factors as corrosion rates, catalytic activity, adhesive properties, wettability, contact potential and failure mechanisms.
The material’s surface is the point of interaction with the external environment and other materials. Therefore, surface modification can be used in a wide variety of applications to alter or improve the performance and behavior of a material. XPS can be used to analyse the surface chemistry of a material after an applied treatment such as fracturing, cutting or scraping. From characterisation of nuclear waste materials to thin-film electronics and bio-active surfaces, XPS is the standard tool for surface material characterisation.
Synchrotron radiation has a variety of properties which make it an attractive source for quantitative X-ray photoelectron spectroscopy. Among the most significant are the high intensity and tunable energy it produces. This continuous source of energy means that selected wavelengths can be employed to allow depth-dependent chemical analysis (e.g. cross section and absorption edge) of a material or element being researched. In addition, the increased photon intensity of a synchrotron leads to shorter data acquisition times when compared to lab-based X-ray sources. Modern synchrotron-based ambient pressure XPS systems are also able to operate at pressures higher than 7 mbar which allows the investigations of surfaces in equilibrium with, for example, water vapour in more industrially relevant conditions.
Diamond Light Source is the UK's national synchrotron science facility, located at the Harwell Science and Innovation Campus in Oxfordshire.
Copyright © 2022 Diamond Light Source
Diamond Light Source Ltd
Diamond House
Harwell Science & Innovation Campus
Didcot
Oxfordshire
OX11 0DE
Diamond Light Source® and the Diamond logo are registered trademarks of Diamond Light Source Ltd
Registered in England and Wales at Diamond House, Harwell Science and Innovation Campus, Didcot, Oxfordshire, OX11 0DE, United Kingdom. Company number: 4375679. VAT number: 287 461 957. Economic Operators Registration and Identification (EORI) number: GB287461957003.