Beamlines | B16 - Facility and Equipment Availability

Beamline specifications

Restrictions apply. Please contact beamline staff well in advance to discuss feasibility.

Operational modes

Feature
Availability
Comments
Monochromatic focused (4-20 keV)
Available
 
Monochromatic unfocused
(4-25 keV)
Available
 
White beam
Available
 

Monochromatic, focused or unfocused (2–4 keV)

 

Limited availability

Very low flux as beam exits through a Be window.
Contact B16 staff well in advance.

Beam size:

Focused < 200 μm x 200μm
Unfocused: 100mm (h) x10 mm(v)
Microfocused: ~ 1.5 μm x 1.5 μm
Nanofocused: ~ 500nm x 500 nm

Available

In microfocused mode, the beam size is energy / focal length dependent.
Nano-focused beam available on best-effort.

 

Optics

Equipment
Availability
Comments

Double Crystal Monochromator
Si 111 (2 – 20 keV)

Available
 
Toroidal mirror (1:1 focusing)
Available

Focal distance of the mirror can be adjusted to keep the beam in-focus at any position along the 12m length of the experimental hutch.

DCM bandpass: ~1.8 x10-4
Available

Divergence limited bandpass. No collimating mirror – the DCM is the first optical element.

Double Multilayer Monochromator
- for higher-order suppression and for high-flux modes

Available

 

Micro / Nano-focusing optics
- Be compound refractive lenses
- Fresnel zone plates

Available

Contact B16 staff.

Experimental Hutch

Equipment or detector

Availability
Comments

5-circle Huber Diffractometer with Chi cradle
Detector mass 30 kg
Theta (ω) : -100° to +235.5°
2Theta (δ): -10.4° to +101.9°
Alpha       : -33° to +33°
Chi          : -96.4° to +259.9°
Phi          : -147° to +150°
Theta-analyser: 0 to (no limits),
2Theta-analyser: -157.5° to +157.5°

Available

- Angular range of some axes is restricted by mounts and beamline delivery systems. Available angular ranges are given here.

 -2Theta (δ) range can be changed/adjusted, if needed.

XYZ sample stage on Diffractometer
X = ±25 mm
Y = ±25 mm
Z = ±12.5 mm
Load capacity ≤20 kg
Available
 

Versatile Optics Table
      Size :2m x 1.2m

Optics/sample station
X = ±25 mm
Y = ±25 mm
Theta = ±135°
Phi = ±10°
Chi = ±10°
Load capacity ≤5 kg

Diagnostics station
X = ±25 mm
Y = ±25 mm
Theta = ±135°
Phi = ±10°
X Piezo=300 mm
Y Piezo=300 mm
Load capacity ≤5 kg
 
Detector station
X = ±50 mm
Y = ±50 mm
Load capacity ≤ 20 kg

Relative motions (along beam direction and transverse) possible between the three stations.

Available
 

Large area X-ray diffraction detector :

Photonic Science X-ray Image Star 9000, 135mm dia, 3056 x 3056 pixels, 31 mm optical pixel size

Available
 
X-ray Eye:

Photonic Science X-ray MiniFDI, 11mm dia, 1392 x 1040 pixels, 6.5μm optical pixel size

Available
 

VORTEX 90EX X-ray spectroscopy detector:

   Active area           = 50mm2

   Energy resolution ~ 150 eV

        @5.9 keV
Available
 
High Resolution X-ray Microscope:

-         PCO CCD camera 4008 x 2672 pixels, 14bit dynamic range

-         Objectives :1.25X to 40X

-         Several optimized scintillators

-         Theoretical spatial resolution limit <0.5 μm

 
Available

Contact B16 staff.

Uniblitz fast shutter (6mm opening aperture, to be used with focused or slitted beams)

Limited Availability

Contact B16 staff.

APD Ultrafast X-ray detector
Active Area     : 10mm x 10mm

Max count rate: 100 MHz

Available
 
Other Detectors:

PIPS diodes, scintillation counter and ionization chambers

Available

Contact B16 staff.

Various general-purpose viewing cameras

Available
 

Support labs

Equipment
Availability
Comments
Zeiss Stereo Optical Microscope
Available
 
Laminar Flow table
Available
 

Fume cupboard, small balance (mg – g), ultrasonic bath, etc

Available
 

Dark room for photographic film development

Available

Contact B16 staff.

For any further information, please contact a member of the beamline staff.